A-headed 521" pump gas build. - 460 Ford Forum
Engine Build Archive A place to archive DYNO or 1/4mile VERIFIED engine builds. Please post any engine tech questions to the Engine Tech forum.

User Tag List

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 33 (permalink) Old 02-08-2013, 10:16 PM Thread Starter
Senior Member
 
Join Date: Jan 2008
Posts: 1,308
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
A-headed 521" pump gas build.

We are making some progress on the new build. Local friend James Bostick has the duty of building this for me.

Edit: now that I think about it, it's actually a 528 as it's a .060 overbore, not .030, just started with the 521" kit.

Dove A block .060 over ( aftermarket 4 bolt kit, block from Paul Kane)
521" FRPP kit 4.30" stoke, Eagle rods,replaced SRP pistons with JE's to work with A-460 heads
'93 A-460 heads 2.3 intake heads flow 420 cfm at .750
Schneider solid roller: @ .050" 276-284 ( adv. 306-312) lobe lift .430int - .435ex, lobe sep 112
gross lift .744int .752 ex
Plan on running a single 4 and TR when on the dyno
Pump gas build to run 11:1 compression.
Hoping for 600hp+

Hopefully will have some dyno results by April:







Not sure if the Danny Bee will stay on or not, figured we could advance and retard the cam on the dyno to see what we get. Belt drive just might end up on a different project.

Stroker kit and Danny Bee from Lem Evans.

Jon

http://i201.photobucket.com/albums/a...elake3-1-1.jpg
Going fast is only half the fun....what you make go fast is the other.

Last edited by G-Code; 02-09-2013 at 03:03 PM.
G-Code is offline  
Sponsored Links
Advertisement
 
post #2 of 33 (permalink) Old 02-08-2013, 10:52 PM
Super Moderator
 
bigblok86ranger's Avatar
 
Join Date: Mar 2009
Location: Beloit , Wisconsin
Posts: 5,255
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
      
Send a message via Yahoo to bigblok86ranger
I would think 700+hp

Eric Millard
bigblok86gt@yahoo.com

528ci of N/A power

Circle R Racing Engines

Trick Chassis
Beloit,WI 53511
608-313-9197

http://www.trickchassis.com/

"LOL, WE DONT RACE DYNOS" Quoted for the truth!

Last edited by bigblok86ranger; 02-08-2013 at 11:04 PM.
bigblok86ranger is offline  
post #3 of 33 (permalink) Old 02-08-2013, 10:59 PM
Senior Member
 
BOSS 429's Avatar
 
Join Date: Jan 2007
Location: ILL
Posts: 3,143
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
 
'93 A-460 heads 2.3 intake heads flow 420 cfm at .750


420 @750 ..........???????????

RICH
CIRCLE (R) 815 712 8738
--------------------------------
815-712-8738
BUY,SELL, or TRADE B B FORD parts
Dynoed or Test ran
CLYINDER HEAD PORTING
COMPLETE ENGINES avb
From STOCK to NOT
BOSS 429 is online now  
post #4 of 33 (permalink) Old 02-08-2013, 11:03 PM Thread Starter
Senior Member
 
Join Date: Jan 2008
Posts: 1,308
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by BOSS 429 View Post
'93 A-460 heads 2.3 intake heads flow 420 cfm at .750


420 @750 ..........???????????
Well, needless to say they aren't just out of the box
These are the heads that were on my 565 before I switched heads on it.

http://i201.photobucket.com/albums/a...elake3-1-1.jpg
Going fast is only half the fun....what you make go fast is the other.
G-Code is offline  
post #5 of 33 (permalink) Old 02-08-2013, 11:04 PM Thread Starter
Senior Member
 
Join Date: Jan 2008
Posts: 1,308
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by bigblok86ranger View Post
I would think 700+hp easy.
yeah maybe

http://i201.photobucket.com/albums/a...elake3-1-1.jpg
Going fast is only half the fun....what you make go fast is the other.
G-Code is offline  
post #6 of 33 (permalink) Old 02-09-2013, 02:37 AM
Senior Member
 
Join Date: Dec 2006
Location: Boise, Idaho
Posts: 759
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
lol..I think you know it'll make more than 600-700...
Here's mine:
http://www.429-460.com/t14610-dyno-r...ctane-pump-gas
dirt_worker is offline  
post #7 of 33 (permalink) Old 02-09-2013, 03:02 AM
Senior Member
 
Join Date: May 2010
Location: Australia
Posts: 962
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 46 Post(s)
 
You'll hit 800hp by 6000rpm

Sweet build.

Whats the intended use?

Cheers, Bob
bob460 is offline  
post #8 of 33 (permalink) Old 02-09-2013, 11:15 AM Thread Starter
Senior Member
 
Join Date: Jan 2008
Posts: 1,308
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by bob460 View Post
You'll hit 800hp by 6000rpm

Sweet build.

Whats the intended use?

Cheers, Bob

back-up engine for the boat, but it just might find it's way into my '69 Mach 1 if all goes well.


Jon

http://i201.photobucket.com/albums/a...elake3-1-1.jpg
Going fast is only half the fun....what you make go fast is the other.

Last edited by G-Code; 02-09-2013 at 12:23 PM.
G-Code is offline  
post #9 of 33 (permalink) Old 02-09-2013, 11:16 AM Thread Starter
Senior Member
 
Join Date: Jan 2008
Posts: 1,308
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by dirt_worker View Post
lol..I think you know it'll make more than 600-700...
Here's mine:
http://www.429-460.com/t14610-dyno-r...ctane-pump-gas


maybe.............. if I'm lucky

http://i201.photobucket.com/albums/a...elake3-1-1.jpg
Going fast is only half the fun....what you make go fast is the other.
G-Code is offline  
post #10 of 33 (permalink) Old 02-11-2013, 08:47 AM
Senior Member
 
Join Date: Jan 2006
Location: Livermore Ky
Posts: 8,416
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 28 Post(s)
        
Smile

looks like a fun project!

B F Evans Race Parts
270-278-2376
Lem Evans is offline  
post #11 of 33 (permalink) Old 02-11-2013, 05:33 PM Thread Starter
Senior Member
 
Join Date: Jan 2008
Posts: 1,308
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by Lem Evans View Post
looks like a fun project!
it's always fun to make some noise on the dyno. We'll get to see what that TR I got off you does for it.

Jon

http://i201.photobucket.com/albums/a...elake3-1-1.jpg
Going fast is only half the fun....what you make go fast is the other.
G-Code is offline  
post #12 of 33 (permalink) Old 02-27-2013, 10:12 AM Thread Starter
Senior Member
 
Join Date: Jan 2008
Posts: 1,308
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Making progress
A couple parts showed up yesterday and the push rods have been ordered:


http://i201.photobucket.com/albums/a...elake3-1-1.jpg
Going fast is only half the fun....what you make go fast is the other.
G-Code is offline  
post #13 of 33 (permalink) Old 02-28-2013, 10:23 AM
Senior Member
 
Join Date: Nov 2009
Posts: 427
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 22 Post(s)
 
I'm betting on 750 HP in the 6500-7000 RPM range and 660 TQ in the 5000-5500 RPM range.
DanE is offline  
post #14 of 33 (permalink) Old 03-24-2013, 01:49 PM
Senior Member
 
cletus66's Avatar
 
Join Date: Jan 2006
Location: Charles City, Virginia
Posts: 2,787
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
 
Cool project !!

Where's my beer and that half inch wrench?

http://i168.photobucket.com/albums/u...cecar066-1.jpg
cletus66 is offline  
post #15 of 33 (permalink) Old 03-24-2013, 11:58 PM Thread Starter
Senior Member
 
Join Date: Jan 2008
Posts: 1,308
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by cletus66 View Post
Cool project !!
it should be done in a couple weeks.

http://i201.photobucket.com/albums/a...elake3-1-1.jpg
Going fast is only half the fun....what you make go fast is the other.
G-Code is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the 460 Ford Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome