Here's a collection of forged piston sets, some new, some used, all kinds of sizes, for all kinds of uses from naturally aspirated to blown applications, all in great condition. All prices are plus shipping, all questions please call me directly.
Ross 460 Dome Top Pistons #1. For OEM 460 stroke, H-beam rods included, for 4.39" bore, 0.440" dome, 2.93" pins, 1.765" c/h, 1/16" rings, very lightly used, includes H-beam rod set with one resized (this was deemed unnecessary but we did it anyway to keep the buyer happy), rings included and are perfectly reusable, far superior to TRW Speed Pro dome tops, just rinse 'em clean and put 'em in. Custom pistons, pins, rings, and rods, all said about $1500 new, sell for $---
Ross #1 Domed Pistons & Rods Are Sold
Ross 460 Dome Top Pistons #2. New, for OEM 460 stroke and rods, for 4.44" bore, 0.425" dome, accepts 1/16" rings, installed into short block on a stand then removed, far superior to TRW Speed Pro dome tops, these are brand new and unused, pistons pins & clips: $---
Ross #2 Domed Pistons Are Sold
Ross 460 Dome Top Pistons #3. New, for OEM 460 stroke and rods, for 4.44" bore, 0.090" dome, accepts 1/16" rings, far superior to TRW Speed Pro dome tops, these are brand new in box and unused, pistons pins & clips: $
Ross #3 Domed Pistons Are Sold
Ross Flat Top Pistons. For 4.50" bore, std valve layout, 0.990" c/h, pistons only, accepts 1/16" rings & 2.93" BBF pin, new: $300
Ross Flat Top Pistons. This set of pistons requires a special order set of rings to use them (call for details if interested), for 4.47" bore, 0.990" pin, 1.52" c/h, accepts 5/64" rings, pistons only, you cut the valve relief, new: Set of 8 pistons for just $189
Ross Forged Pistons for Bastard Pro Stock Heads. 4.605" bore, 1.352" c/r, 0.043" ring pack, vertical gas ported, lightened, hollow dome, net 15cc dome, ~640g, Set of 10 pistons with 8 pins (8 run pistons & 8 pins + 2 brand new unused spare pistons): About $1500 new, sell $500
Bastard Pro Stock Pistons Are Sold
Arias Forged Pistons for Olds 403/Ford Stroker. Can be used to build a Ford stroker as follows: these Olds 403 pistons (for 4.38" bore) + Pontiac 6.625" rod ($288 from RPM) + 4.10" offset stroke 460 crank = 494 cubic inches with 10.30" stack height. 10:1 c/r with D3's and 12:1 c/r with D0VEs. Valve reliefs should be cut for the 460 head used. Arias retails these for $780, set of 8 new pistons with pins for $---
Arias Olds/Ford Stroker Pistons Are Sold
Venolia Blower Pistons. For 4.600" bore, 1.427" c/h, accepts Chrysler 1.094" pin & 0.043" 1/16" 3/16" ring pack, set of 10 new pistons: $---
Venolia Blower Pistons Are Sold
Wiseco Blower Pistons (or pump gas stroker pistons). For 4.500" bore, 42cc dish, 0.990" pin, 1.435" c/h, accepts 1/16" rings, set of 10 pistons pins & clips, new: $550
Please call directly with any questions and/or to purchase,
KB Icon IC855 forged pistons: For 4.40" bore, 1.577" c/h, accepts 1/16" ring pack, includes pistons and 0.990" pins, for standard valve layout heads, works with 6.8" rod and 460 stroke, or 6.7" rod and 4.05" stroke, or 6.66" rod and 4.14" stroke. Brand new retail from KB is $627, sell for $475
Didn't see a contact number. Interested in ur Ross flat top 4.5bore pistons with single valve relief. What size is relief cut? You can text reply 4847073453. Thanx
Hello bbuck, the phone number is at the bottom of posts #1 & #2 . It is written in alpha-numeric form (so as to throw off the online bots) and appears as follows:
Please call directly with any questions and/or to purchase,
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
460 Ford Forum
671.2K posts
35.2K members
Since 2006
A forum community dedicated to Ford big block owners and enthusiasts. Come join the discussion about performance, modifications, horsepower, tuning, build specifications, and more!