Join Date: Aug 2008
Location: Moose Jaw Saskatchewan Canada
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Remove the valve body.
Pay special attention to the detent position in relation to the manual shift valve in the valve body as well as the k/d lever.
Remove the 1/2" nut from the k/d lever.
Remove the 7/8" nut from the shift assembly.
The shift arm can now be pulled out.
Now would be an excellent time to replace the seal and "O" ring.
Reverse the procedure.
Wrench twister since 1957.
Journeyman in 1964.
Transmission builder since 1964.