built drag 514 what intake manifold? - 460 Ford Forum
General Race Tech All other topics, such as Fuel Delivery, Ignition, Engine, Safety, Data Aquisition, Suspension, etc...

User Tag List

 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 10 (permalink) Old 03-01-2013, 09:41 PM Thread Starter
Junior Member
 
BurnRubberNotYourSoul's Avatar
 
Join Date: Oct 2012
Location: wyoming
Posts: 26
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
built drag 514 what intake manifold?

I have a d2 460 block with a forged 514 stroker setup. Flattop 10.5-1 pistons,solid roller cam and valve train etc etc. I currently have ported c8 cj heads. With a matched ported offenhauser port-o-sonic intake and a 850 speed demon. 3500 stall. This is going to be a strict strip motor. It will only occasionally se the street to find some high schoolers or diesels. Its currently in a 69 mustang but that may change. I dont know the specs on the cam but it does pull to 7500 rpm. I dont know what intake I should go to with right now. Im seeing mixed results about my offy and I originally had my eye on switching to the weiand high ram dual quad but now im considering the victor too. Basically too many options not enough experience. Any opinions on the intakes would be appreciated.
BurnRubberNotYourSoul is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 03-02-2013, 03:11 AM
Senior Member
 
Join Date: Jan 2006
Location: Australia
Posts: 2,063
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
 
I'd be gpong the Victor or TFS single planes and a Dominator . Flick that Speed Demon
gregaust is offline  
post #3 of 10 (permalink) Old 03-02-2013, 11:27 AM
Junior Member
 
dutchman's Avatar
 
Join Date: Jun 2012
Location: casper wy.
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
where in wyo. are you from?
I live in Casper.
Kevin
dutchman is offline  
post #4 of 10 (permalink) Old 03-02-2013, 03:31 PM Thread Starter
Junior Member
 
BurnRubberNotYourSoul's Avatar
 
Join Date: Oct 2012
Location: wyoming
Posts: 26
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Ok so thats one vote for the victor. Anyone else with experience?

Quote:
Originally Posted by dutchman View Post
where in wyo. are you from?
I live in Casper.
Kevin
I am in cheyenne

69 mustang mach 1 - big and nasty 514... needs more power
BurnRubberNotYourSoul is offline  
post #5 of 10 (permalink) Old 03-03-2013, 06:30 PM
Senior Member
 
Join Date: Sep 2012
Location: Southern maryland
Posts: 536
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Trick flow ..... 514 and 7500 rpm with little street..... Trickflow.... No experience with this but I know a coue people that have pulled 20 hp plus over the victor at less rpm......what are your cam spec????

Damn girl... You look better than a new set of mud tires
1993 f350 38's 5 speed. Toy

521 p51 headed pump gas street motor
639 hp at 5600 rpm
670 ft/lbs at 4300 rpm
Imtruckinup is offline  
post #6 of 10 (permalink) Old 03-03-2013, 08:00 PM Thread Starter
Junior Member
 
BurnRubberNotYourSoul's Avatar
 
Join Date: Oct 2012
Location: wyoming
Posts: 26
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by Imtruckinup View Post
Trick flow ..... 514 and 7500 rpm with little street..... Trickflow.... No experience with this but I know a coue people that have pulled 20 hp plus over the victor at less rpm......what are your cam spec????
I dont know the cam specs. It was a custom grind and the guy I got it from didnt give me the spec card which really pisses me off. But by the time im actually "done" with the motor I will probably need a different cam anyways. But I will look into the tf intake.

69 mustang mach 1 - big and nasty 514... needs more power
BurnRubberNotYourSoul is offline  
post #7 of 10 (permalink) Old 03-04-2013, 03:46 PM Thread Starter
Junior Member
 
BurnRubberNotYourSoul's Avatar
 
Join Date: Oct 2012
Location: wyoming
Posts: 26
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by Imtruckinup View Post
Trick flow ..... 514 and 7500 rpm with little street..... Trickflow.... No experience with this but I know a coue people that have pulled 20 hp plus over the victor at less rpm......what are your cam spec????
I dont know the cam specs. It was a custom grind and the guy I got it from didnt give me the spec card which really pisses me off. But by the time im actually "done" with the motor I will probably need a different cam anyways. But I will look into the tf intake.

69 mustang mach 1 - big and nasty 514... needs more power
BurnRubberNotYourSoul is offline  
post #8 of 10 (permalink) Old 03-04-2013, 06:19 PM
Senior Member
 
BBFmavrick's Avatar
 
Join Date: Jan 2007
Location: jackson,ohio
Posts: 3,790
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
IMO,you are over winding it,no matter what intake you use. The port-o-sonic is a decent intake.Not the best ,BUT chances are that you don't have the ideal setup w/parts anyway.You will pickup more ET shifting at about 6k/6200.. We need to know a lot more about your parts before we can tell you which intake to use.

Rick Brown
(LIL TWEETY) BBF 62 Falcon Tube Chassis
Member of a BAND OF BROTHERS

Pro Motion Machining
Perfect Reflections Photography
Bronx Corner Automotive
BBFmavrick is offline  
post #9 of 10 (permalink) Old 03-04-2013, 07:28 PM Thread Starter
Junior Member
 
BurnRubberNotYourSoul's Avatar
 
Join Date: Oct 2012
Location: wyoming
Posts: 26
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by BBFmavrick View Post
IMO,you are over winding it,no matter what intake you use. The port-o-sonic is a decent intake.Not the best ,BUT chances are that you don't have the ideal setup w/parts anyway.You will pickup more ET shifting at about 6k/6200.. We need to know a lot more about your parts before we can tell you which intake to use.
I ve got forged scat crank forged eagle h-beam rods, forged flat top 10.5:1 KB pistons, ported c8 cobra jet heads, manley roller rockers, mechanical roller cam, msd 7al-2, mallory coil and distributor, longtube headers, 3" exhaust. I dont know the specs on the cam or heads. At this point my heads are the biggest problem but I dont have 2g to drop on heads right now. But Once I get heads everything is going to change again because im going to go with a blower.

69 mustang mach 1 - big and nasty 514... needs more power
BurnRubberNotYourSoul is offline  
post #10 of 10 (permalink) Old 03-04-2013, 07:32 PM Thread Starter
Junior Member
 
BurnRubberNotYourSoul's Avatar
 
Join Date: Oct 2012
Location: wyoming
Posts: 26
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
And right now ive got a c6 with a 3500 stall (I think I need more stall) and 410s

69 mustang mach 1 - big and nasty 514... needs more power
BurnRubberNotYourSoul is offline  
Sponsored Links
Advertisement
 
Reply
Gear in this thread - Powered by O'Reilly Auto Parts

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the 460 Ford Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome