Diamond Racing Piston Clearance Sale
This is a one time clearance price, never to be repeated, limited to stock on-hand.
These pistons would normally be priced at $850.00, but we're blowing them out for ONLY $549.95 per set pistons, pins, and locks included
Diamond Racing Pistons part #40504
Diamond Racing Pistons part #40001
Please call, PM, email with questions, or to order.
.
This is a one time clearance price, never to be repeated, limited to stock on-hand.
These pistons would normally be priced at $850.00, but we're blowing them out for ONLY $549.95 per set pistons, pins, and locks included
Diamond Racing Pistons part #40504
- 4.440 bore (+.080 overbore)
- For use with stock dimension rods and crank, 3.850 stroke and 6.605 length rods with 1.040 pin
- New old stock, only removed from packaging for photos
- Forged 2618 alloy
- H-13 tool steel pins included at no additional cost - normally a $100.00 upgrade - they are the strongest pins you can buy
- For use with Kaase style SCJ / P51 and AFR heads ONLY.
- While specifically made for SCJ/P51 heads, the valve relief will provide approx .150 valve pocket depth for AFR heads - please ask questions about this if unclear
- WILL NOT work with D0VE D0OR-E C8VE C9VE D3VE Edelbrock ProComp Speedmaster Trickflow, A460 heads
- Great for a pump gas build with AFR 85cc heads
- Great for racing and/or E85 use with SCJ/P51, or AFR small chamber heads.
- Approx 12.0:1 compression with 72cc heads
- Approx 10.6:1 compression with 85cc heads
Diamond Racing Pistons part #40001
- 4.390 bore (+.030 overbore)
- For use with stock dimension rods and crank, 3.850 stroke and 6.605 length rods with 1.040 pin
- New old stock, only removed from packaging for photos
- Forged 2618 alloy
- H-13 tool steel pins included at no additional cost - normally a $100.00 upgrade - they are the strongest pins you can buy
- For use with stock valve location heads only. D0VE D0OR-E C8VE C9VE D3VE Edelbrock ProComp Speedmaster Trickflow, etc.
- WILL NOT work with SCJ P51 AFR A460 heads
- Great for a pump gas build with D3VE, Edelbrock 95cc, or ProComp/Speedmaster heads
- Great for racing use with small chamber D0VE, Edelbrock 75cc, Trickflow, and factory CJ heads
- Approx 11.4:1 compression with 75cc heads
- Approx 9.5:1 compression with 95cc heads
Please call, PM, email with questions, or to order.
.