rod bolt torque

Hi fellows, Can any one here tell me the specs on rod bolt torque for eagle sir rods. Picked the rods up at swap meet with no paper work. Thanks in advance chuck :lol:

Well I guess it depends which bolts you have with the rods .
My Paperworks says.
With Moly Lube TQ Method With other lubes Bolt Stretch method
7/16" ARP 8740 Bolts get 63 ft. # or .0059"-.0063" Bolt Stretch
7/16" ARP 2000 Bolts get 75 ft. # or .0064"-.0068" " "
7/16" ARP L-19 Bolts get 79 ft. # or .0073"-.0077" " "



Hope this helps ..

ShaZam

Hey trukpular thanks for the responce the only info i have on the rods is the part # on the box is sir6605fb. Dont know if this will help. Any other ideas. Thanks, chuck

OK if you OPEN the box and look at the end of the rod bolts it will say what they are .
ARP 8740
ARP 2000
ARP L-19


When you find out which ones they are just use the list I gave you to Tq. them down.
Is there a tube of moly lube in the box??
If not let me know I'll send you one.


ShaZam

Hey trukplr thanks again, found the number also have the moly lube in box thanks again for your help they re arp 8740. Chuck