clutch set-up for truck pulling

what clutch set up do i need for a 460 ford,875 hp with a np 435 trans and a 205 transfer . also who makes heavy duuty clutch fork ??/ i am running a lakewood blowproof bellhousing ..

McLeod or similar twin disk, or crower, titan, molinari or similar triple if you got a deep enough bell.
I know lots of guys were running mcleods twin's with no problems in the 700-800 hp range.

I will have to find the number but Travis of Travs 4x4 will hook you up with a dual disc for about 1400 bucks, works great, grat guy to deal with.

where you located i got a guy that does mine. its a single disc that he swear will take 900 hp. i had $900 in mine

i bought a clutch from south bend clutch for my turbo build. it is rated for 900-1000 ft/lbs of torque and cost me $625 shipped. they said that they could build me a single disc that would hold up to about 1400 ft/lbs

http://www.ramclutches.com/

Tim Carda out of Big Lake MN is a Mcleod dealer and sells twin disc set ups that are made for truck pulling only his number is 763-238-9061

Tim Carda out of Big Lake MN is a Mcleod dealer and sells twin disc set ups that are made for truck pulling only his number is 763-238-9061

Tim actually uses the product he sells too, with CMP and RRVPA.. he's a good guy
mind you i think i saw his truck for sale on racing junk a while back...:confused:

He was looking at a different one I believe at the time but right now he is trying to get the motor together. I have one in my truck and love it I think the dual disc set up is way better than a single disc, its deffinatly way more forgiving

Travis's phone number is 859-991-4996

I didn't have time to type the last time I posted the link. You will find nothing but positive remarks about Travis throughout the truck pulling community! It seems like guys from all over the country have bought from him. I have talked to him on the phone several times and he knows his stuff. I would love to buy from him, but with my financial situation I have been buying my clutch one piece at a time. I didn't want to hassel Travis with that so I went with a ram system.

I called them and told them what I was building (HP, it's use etc) and they gave me the following part #'s:

-Pressure plate: #471CW $472.00 (12.375 Bolt Pattern)
-Disc: #1336 $180.00
-Studs: #492 $103.00
-Shims: #550 $23.00
-Counter Weights #570 $36.00

Ram will sell direct, but they jack the price up to avoid competing with their retailers. The above prices are from summit. I have not bought all of it yet so I can not advise on how well it fits together or performs. Good luck!

How is this clutch working out? It is a single disc correct?

Yes I would like to know too how this set-up worked for you

He said that he hasn't bought all the parts yet and can't advise on how it goes together or how it performs?????

It all went together real nice and easy. I have done a few launches in my back field, but have not pulled with it yet. I hope to get my first hook in June.
It is a single disc.

Kirk