PDA

hey pullers

PHIL1206
11-05-2009, 11:33 PM
who makes a good spool for a dana 80 other than the $1250 haisely one also anything need beefed up while im in the mock up stages
hookin78
11-06-2009, 02:54 PM
Lincoln, century, Miller, Hobart.......... lots of companies.:D

No, but seriously,many guys around here just weld them up, I just done a Dana 80 a couple months ago.
PHIL1206
11-06-2009, 11:18 PM
i seen yukon makes a spool for $650 how about puttin bridge from the backing plate flange under the pig to the other backing plate flange
hookin78
11-09-2009, 03:56 PM
That would help eleminate some flex but I don't really know if it is needed, 14 bolts benefits from this but I believe and 80 would be OK without.
PHIL1206
11-09-2009, 06:19 PM
as much those axles go for maybe i should brace it my hitch works from the bottom side of axle and traction bars off top side
hookin78
11-10-2009, 05:21 PM
Good call.........
PHIL1206
11-10-2009, 05:49 PM
what class you pull in where your at theres some pretty tough trucks down your way
hookin78
11-10-2009, 10:34 PM
I just run the street stock class right now, I have built a few others , I am currently putting together a cheater stock truck (Cast heads, NO dommies, 514 cubes) for a freind and hoping to get started on my ProStock motor soon.:D
PHIL1206
11-11-2009, 05:24 AM
I just run the street stock class right now, I have built a few others , I am currently putting together a cheater stock truck (Cast heads, NO dommies, 514 cubes) for a freind and hoping to get started on my ProStock motor soon.:D

whats your pro stock rules can you send me a copy of them
hookin78
11-12-2009, 08:30 PM
The best thing to do would be to follow this link.......

http://truckpulls.com/forum/viewtopic.php?f=45&t=802


This pretty much covers everything , and more, lots of good info on this website also.:D
PHIL1206
11-12-2009, 08:42 PM
thank ya oh by the way thats a good lookin ol ford ya got
hookin78
11-12-2009, 10:17 PM
Thank ya............
mikejvan
12-07-2009, 06:37 PM
i run a 70 with welded gears in a super stock class never had problems in so far 12 years but gm 14 bolt have a lot mor option;s that a dana 80 and a 3rd pinion bearing where the 60/70/80 dont
bmkelley1
12-10-2009, 06:59 PM
I see scs makes a spool for a dana 80
bmkelley1
12-10-2009, 07:08 PM
I used to run an 80 with 4.62 gears and wire welded spiders with no problems, and it was behind a 532 motor with 900 hp. I wouldn't think u would have a problem with one unless it bounced like a yo-yo. lol :)