Video of 466 A429 Heads Roller - Mustang

Phantasea466
01-11-2006, 07:26 AM
http://www.zippyvideos.com/9984448503150996/466_a429_roller_1/

I have two more videos but I'm having trouble with the zippy login so I haven't uploaded them yet.


Finally got the zippy site to work. 8)

http://www.zippyvideos.com/5574425113165216/466_a429_roller_2/*phantasea466

Video in the drivers seat

http://www.zippyvideos.com/4510848933164176/466_a429_roller_drivers_seat/:

Been some requests for engine specs: If you guys need more info please let me know.

t's a 466 with A429 aluminum CJ heads (Charlie and Scott worked on the heads) with 13:1 compression and a BIG roller cam via Lem Evans 272/280 @ .050 and .727/.727 lift
The bottom end consists of a stock crank turned down to 2.200" with BBC Eagle H-beam rods and BRC domed pistons pinned together with 4-bolt splayed Engine Systems main caps and screw in block plugs.
The Victor Dominator is matched to the heads with some port work in the flange area via Charlie Evans and the Dominator carb is a Jim Evans Racing piece, it runs kind of rich on idle but at WOT it's BAD A$$

Thanks

Phantasea466
01-11-2006, 04:39 PM
Video is working, For Now :?

http://www.zippyvideos.com/9984448503150996/466_a429_roller_1/

466bbfox
01-11-2006, 05:00 PM
no revs???, im disappointed. J/K Nice job though.

Ourmerc
01-11-2006, 05:37 PM
Congrats man I could play thst all night!!!
Bob Meader

bigblock79
01-11-2006, 06:34 PM
man I really was hoping for a rev , sounds great . hope my new combo sounds that good. BTW how much comp?

jjmstang
01-11-2006, 06:52 PM
nice sounding engine

jbozzelle
01-11-2006, 09:14 PM
Sounds good! When can I pick it up?

Phantasea466
01-12-2006, 06:35 AM
I have a few short revs on another video but it's over 10mb so zippy won't let me load it . I created an account where I can load up to 20mb videos but for some reason my login isn't working. I sent a message to the help section.

With the BRC pistons I've calculated about 13:1 compression :twisted:

If I get time I'll try to convert the mov files to wmv and see if it will shrink

John, I guess you can come pick it up on February 30th, I'll be at the shop then :wink:

Thanks guys!

Bigbub1968
01-12-2006, 08:52 AM
Hey Damon! Try Streetfire.net, is free too, and you can upload up to 150 mb! You engine sounds nasty!!

Phantasea466
01-12-2006, 09:03 AM
Hey Damon! Try Streetfire.net, is free too, and you can upload up to 150 mb! You engine sounds nasty!!

Thanks! I hope it runs as good as it sounds :twisted:

I opend an account with streetfire.net but when I click on "upload" it gives me an error and says to try again later. Maybe it's too crowded :?:

The same with zippyvideos. I had to upload those two videos anonymously because my account isn't logging in correctly :?: