need info on 460 c6 dipstick and yoke?

i have intalled a 460 in my 1969 mustang and just installed the c6 transmission and was hoping someone could tell me how many different dipsticks and how many different yokes there are for the c6? i have a couple of dipstick tubes but no dipstick. also i will be reusing my driveshaft with the end tha hooks to my rearend just wanted to have the yoke on the trans end swaped from the c4 yoke to a proper c6 yoke. any help is appreciated as i want to get the right items the first time. i have located some on ebay but am unsure about correct fit. thanks jon

i will be reusing my driveshaft with the end tha hooks to my rearend just wanted to have the yoke on the trans end swaped from the c4 yoke to a proper c6 yoke. any help is appreciated as i want to get the right items the first time. i have located some on ebay but am unsure about correct fit. thanks jon

What size is your U-joint(s)? That will dictate what size yoke you will need. Most likely you have a 1330 U-joint so any 1330 C6 yoke will work. I have a couple yokes but one is attached to a drive shaft for a BBF Fox Mustang and the other is being used as a plug for a C6 in storage.

The C6 that's in storage (Is for sale as a matter of fact) has a Lokar dipstick tube assembly. It seems to work pretty good.

I also run a lokar dipstick tube and I really like it cause it is flexable so you can mount it out of the way and make it clear in tight places which is the problem I had with my setup when I first put it together.

For what its worth I too am using the Lokar dip stick and it works great.