4 BOLT SWAP TO 5 BOLT WHEELS ON FOX BODY

I have a 1988 mustang that was originaly a 4 cylinder{now 460} car and I want to put on Cobra R 17x8 wheels, what do I need for the front? I am going to change to a 9 inch rear diff so I just need ideas for the front. I have read about changing to sn95 spindles,hubs,calipers and Lincoln rotors, please give me some help to get what I need for a reasonable price. Thanks

Steve M. with Car Craft just did a low buck article about using Aerostar/Ranger/Bronco2 (ARB) rotors on a Fox body. You just need to swap bearings and *maybe* have the outside of the rotor turned down very slightly (like .050" or so) for caliper clearance.

Maybe someone can scan it for you.

http://mjbobbitt.home.comcast.net/mustang/5lug.html
8)

Good info in the replies, nice to know the Cobra wheels wont fit with the Lincoln rotors.

Unless you just want bigger rotors, you can get 5 lug rotors from Powerslot. They swap right out for the 4 lug.

Are they the same size as the 4 cylinder rotors?

There's some good info here.

http://sn95brakes.com