chilly
01-24-2006, 03:38 PM
Next Topic >> Return to Index
796 hp 514 with Blue Thunder B Heads
February 13 2005 at 5:03 PM
Scott (Login bulletpruf)
from IP address 66.157.33.149
--------------------------------------------------------------------------------
4 bolt DOVE-A block
Lunati Stroker kit
13.5:1 compression
Lunati roller #51699, .761/.761, 284/294 exhaust @ .050, 110 LSA, 108 CL
Stef's vacuum pump
Roller cam bearings
Aluminum Blue Thunders w/Chevy exhaust, 2.25/1.94, ported (no flow #'s)
Jomar stud girdle, FRPP roller rockers
Holley 1250 Dominator
Victor intake - port matched
MSD dizzy and 7AL3 ignition box
2.25” x 34” primaries, 4” x 13” collectors
795.7 hp at 7000
645 torque at 6100 and 6400
Between 791-795 hp from 6500-7400
This message has been edited by bulletpruf from IP address 71.51.8.105 on Dec 10, 2005 4:20 AM
This message has been edited by bulletpruf from IP address 204.210.112.12 on May 30, 2005 7:45 PM
Edit Message Delete Message Lock Thread Respond to this message
Author Reply
Steve
(Login builttorace)
69.134.51.67 Re: 800 HP 514 with Blue Thunder Heads February 22 2005, 1:10 PM
545 probe kit
13.7:1
old cobra jet heads flowed 385@.800 with 2.250
lunati 276 284@.050 .730" solid roller
harland sharp rockers
jomar girdle
plain 1/16 1/16 3/16 ring pack
ford motorsport intake. like a victor
1250 holly
810 @ 6800
710 ftlb.
not sure about the tq rpm numbers. built the motor 2 years ago.
Edit Message Delete Message Lock Thread Respond to this message
JON
(Login JONMOOSE)
134.146.0.6 Intake June 2 2005, 1:30 AM
Will my Torker II intake fit big Blue Thunder Heads?
Edit Message Delete Message Lock Thread Respond to this message
Brad
(Login Coupe_Devil)
216.249.160.89 Carb size June 7 2005, 2:40 PM
I really dont think the carb is to big, We have been having great luck with a 1450 alky carb on the 480 cid motor in a pulling truck I help a guy with.
Edit Message Delete Message Lock Thread Respond to this message
Current Topic - 796 hp 514 with Blue Thunder B Heads
Next Topic >> Return to Index
796 hp 514 with Blue Thunder B Heads
February 13 2005 at 5:03 PM
Scott (Login bulletpruf)
from IP address 66.157.33.149
--------------------------------------------------------------------------------
4 bolt DOVE-A block
Lunati Stroker kit
13.5:1 compression
Lunati roller #51699, .761/.761, 284/294 exhaust @ .050, 110 LSA, 108 CL
Stef's vacuum pump
Roller cam bearings
Aluminum Blue Thunders w/Chevy exhaust, 2.25/1.94, ported (no flow #'s)
Jomar stud girdle, FRPP roller rockers
Holley 1250 Dominator
Victor intake - port matched
MSD dizzy and 7AL3 ignition box
2.25” x 34” primaries, 4” x 13” collectors
795.7 hp at 7000
645 torque at 6100 and 6400
Between 791-795 hp from 6500-7400
This message has been edited by bulletpruf from IP address 71.51.8.105 on Dec 10, 2005 4:20 AM
This message has been edited by bulletpruf from IP address 204.210.112.12 on May 30, 2005 7:45 PM
Edit Message Delete Message Lock Thread Respond to this message
Author Reply
Steve
(Login builttorace)
69.134.51.67 Re: 800 HP 514 with Blue Thunder Heads February 22 2005, 1:10 PM
545 probe kit
13.7:1
old cobra jet heads flowed 385@.800 with 2.250
lunati 276 284@.050 .730" solid roller
harland sharp rockers
jomar girdle
plain 1/16 1/16 3/16 ring pack
ford motorsport intake. like a victor
1250 holly
810 @ 6800
710 ftlb.
not sure about the tq rpm numbers. built the motor 2 years ago.
Edit Message Delete Message Lock Thread Respond to this message
JON
(Login JONMOOSE)
134.146.0.6 Intake June 2 2005, 1:30 AM
Will my Torker II intake fit big Blue Thunder Heads?
Edit Message Delete Message Lock Thread Respond to this message
Brad
(Login Coupe_Devil)
216.249.160.89 Carb size June 7 2005, 2:40 PM
I really dont think the carb is to big, We have been having great luck with a 1450 alky carb on the 480 cid motor in a pulling truck I help a guy with.
Edit Message Delete Message Lock Thread Respond to this message
Current Topic - 796 hp 514 with Blue Thunder B Heads
Next Topic >> Return to Index