460 Ford Forum - View Profile: Dman64

Dman64 Dman64 is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 8 of 8
  1. Dman64
    08-14-2014 05:17 PM - permalink
    I would ask customblackbird about that I have never used one.
  2. JJU9507
    08-10-2014 01:49 PM - permalink
    Hello again Dman, I still have not taken the plunge, question. What are your thoughts on using a 200r4 G.M. trans? Still would have L/U and a very common part.
  3. Dman64
    06-03-2014 08:52 AM - permalink
    Trans is working great, 2500 stall, 435HP, if you are locked up and OD is turned off you can hit it hard with no issues, if you go in and out of lock up you will be fine and yes when it goes out of lock up the rpm drops.
  4. JJU9507
    06-03-2014 02:27 AM - permalink
    just checked my messages thanks for getting back, how is your trans holding up/ what is your stall speed/ est. h.p. level of engine. I am building a 521 bb, p-51 roller cam, est. h.p. 550/625 h.p.another question, if you have a 3000 stall converter and hit lock-up it will l/u at 3000, what if you back off throttle at speed and the converter slips back to say 2000 rpm, them hit l/u, then go back to cruising throttle opening, will this give you a lower cruise r.p.m.? thanks, stevo in corona, ca.
  5. Dman64
    04-14-2014 05:52 PM - permalink
    Sorry I haven't been on and didn't see your message, adapter worked great and the 12* turn doesn't affect anything, there is a guy on youtube that rebuilds a 4r75W and does an amazing job of it he makes it look easy, which it isn't really that bad at all. I can chat next weekend if that works for you.

  6. JJU9507
    04-12-2014 03:14 PM - permalink
    well, could I call you sometime tomorrow (sunday)? or send me your # and I will call you. my # is 951-415-5187. I am curious how well that adaptor combo worked, trans build q&a, i know bad shoe productions has great dvd`s for builds, ect. right now it is 1p.m. pacific time. give me a call whenever. stevo. pics would def. be a plus
  7. JJU9507
    04-11-2014 01:36 PM - permalink
    hi, dman, i am lloking to do same swap with same adaptor on a 71 mustang W/521 bb and have some questions. is there any chance of chatting with you on the phone on the weekend ( free phone minutes!) i really would like to try this swap but am not sure of this adaptor, positioning of shift linkage since trans is rotated 12 degrees, ect. were you able to re-use stock style lockup clutch converter, ect.ect. i live in ca.
  8. e9marine
    09-23-2012 08:30 AM - permalink
    like that paint scheme. I'm new to this forum and only have a little ole 351cleveland in my 69f100. Building it slowly. Have had the 2v heads milled, ported, 3angle job and a bowl cut. Gilmore belt drive and gear drive and some chrome goodies but waiting on my cam and lifters from Comp cams. Scraping it down to repaint (this paint job is 9 yrs old),

  About Me

  • About Dman64
    Hotrods and motorcycles
  • Signature
    1964 F100 466 zero decked fuelie 7cc dish pistons, with RHP 2.11 1.65 budget D3 heads, Voodoo cam 219/227, rpm intake, Holley Terminator EFI, MSD Ignition, MSD FORD TFI Distrbutor, 4R70W Trans with Baumann Re-cal kit, US Shift electronic Trans controller with B&M Megashifter, 2500 Dirty Dog Convertor, 3.50 gears with detroit locker.




Total Posts
Visitor Messages
General Information
  • Last Activity: 10-16-2016 08:07 AM
  • Join Date: 05-01-2010
  • Referrals: 0


Showing Friends 1 to 1 of 1
  • JJU9507
    • JJU9507 is offline


No results to display...

  Thread Tags

No results to display...


04:18 PM - akexc quoted Dman64 in post Question on MSD Atomic EFI
...at job. D Thanks Dman64 So, to answer my ow...
08:35 AM - Dman64 quoted hwyhogg in post TBI vs carb
Thanks Dman...nice truck! Wh...
08:57 AM - 1972Mach1 quoted Dman64 in post My Mach 1 552 (and a couple pics of my truck)
Nice truck love the colour ...
08:49 PM - LoweredLincoln quoted Dman64 in post Eddy VS holley???
I had the Eddie performer 7...
07:35 PM - MrScharfenberger quoted Dman64 in post Bikes
I rode lots of dirt bikes a...
07:54 PM - TARA-fied quoted Dman64 in post Cam? or Heads? or Both? biggest bang for the buck
I say do the AFR's and fly ...
12:28 PM - 161854 quoted Dman64 in post 9" detroit locker internals wanted
Maybe put an ad in the clas...
09:58 AM - Mark Laczo quoted Dman64 in post scam in auction block
306 is a Saskatchewan area ...
11:20 PM - customblackbird quoted Dman64 in post Beautiful 521 almost turn key
... end? D Sorry Dman64. It all goes as a pa...
09:01 AM - bajarick quoted Dman64 in post Out with the 351 and in with the 460
You bet it will fit, there ...
04:49 PM - Dman64 quoted Wayne Pearce in post BUNCH OF STUFF FOR SALE
Ford Racing air filter kit with c...
11:02 AM - Dman64 quoted dodge123 in post BIG BLOCK 63 F100 CROWN VIC & T BIRD
Hi Mate WOW that is one stunn...
12:30 AM - The Mad Porter quoted Dman64 in post WTB Pistons for 4.14 6.7 combo
You got this covered. Lol. ...
06:12 PM - Dman64 quoted The Mad Porter in post WTB Pistons for 4.14 6.7 combo
Mahle also makes a flat top for the...
10:47 PM - Dman64 quoted cummins in post under powered
Power band: Idle-6800 RPM ri...
07:21 PM - Dman64 quoted cummins in post under powered
timing set is comp 3222 whic...
For the best viewing experience please update your browser to Google Chrome