460 Ford Forum banner

Finally!!! FUEL INJECTION MANIFOLDS

24K views 12 replies 8 participants last post by  zephyrbob 
#1 ·
Fuel Injection Manifold for 88 and older 429 and 460s. called Edelbrock, got part number. Not on web site, but in cataloge......COOOLLLL

Edelbrock 50665 Its a Victor

Summit says will not fit SCJ heads.....
 
#2 ·
#3 ·
Darn! Pretty sure I need a Victor...6500 rpm upper range for a 460 may not be enough for a 553.

The Edelbrock EFI is much cheaper than buying a Victor and shipping it off to have it converted for $400 more.

It says it will not fit 429 CJ heads....wonder if that means it will not fit SCJ's?
 
#4 ·
Saw that intake advertised six months ago. They still have not added it to their regular site and have to wonder if it actaully is available to buy.

The intake is based on the Torker II and won't match a CJ or SCJ port as the port is taller. Normally you could port the intake to match the CJ port roof, but in this case you cannot because of the fact the injector is located in the port roof. Provided it will seal, which it should unless Edlebrock took material away around the ports you could use the intake on a CJ/SCJ head , but you will be leaving HP on the table. Steve
 
#10 · (Edited)
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top