460 Ford Forum banner

cam choice help..

3K views 1 reply 2 participants last post by  MrScharfenberger 
#1 ·
i got a 1966 ford bronco mud racer (3150 lbs) 565 ci with stage 4 blue thunder heads (chevy exhaust ports)aluminum rods 14:1 compression c-6 tranny with 5500 tci stall.488 gears.Right now im running a lunati solid roller 108 274-778 intake 276-778 exhaust. I would like to get more rpm and more power if i could but not sure which way to go.I was looking at a comp 110 275 806 intake 284 763 exhaust. any opinions?
 
#2 ·
Give Lem Evans a call. He is a member on here and will be able to facilitate a custom spec cam for you. An off the shelf part probably won't optimize your setup. It sounds like a pretty serious motor so don't skimp on the cam. Get one made for your motor and application. For only a few dollars more you will be ahead horsepower in the end. Tell him Chris Scharfenberger sent you.

Lem Evans
BF Evans Race Parts
270-278-2376
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top