460 Ford Forum banner

D9TE and 4.5 stroke

3K views 8 replies 6 participants last post by  68xr7cat 
#1 ·
Do any of the readily available internally balanced 4.5" strokers fit in a D9TE block without clearancing?

If so which ones?
 
#2 ·
The Scat and Eagle cranks fit great.





S
 
#5 ·
I didn't mention the plethora of other offerings because we have no direct experience with them.

Glad to help...



:D



S
 
#8 ·
NOW ... with your 4.500" stroke crank, put in a less expensive production type, steel rod using a 2.200" bearing with "through bolts" and every rod big end will contact the bottom of a bore.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top