Increasing MPG in a 460 - 460 Ford Forum
460 Ford Forum  
Go Back   460 Ford Forum > Tech Topics > Engine Tech

Engine Tech A place to discuss all 385-series engine tech and theory.

460Ford.com is the premier 460 Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-11-2008, 09:06 AM
hernandez1978 hernandez1978 is offline
Junior Member
 
Join Date: Feb 2008
Posts: 1
hernandez1978 Driving a Ford
Default Increasing MPG in a 460

I have a F250 1978, it's taking around 6-7 mpg.
i don't know if its normal.

It has 4 BBL Holley.

any ideas on how to increase the MPG?
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
  #2  
Old 02-11-2008, 09:45 AM
pedal2themetal45 pedal2themetal45 is offline
Member
 
Join Date: Jan 2006
Location: Boise, Idaho
Posts: 167
pedal2themetal45 Driving a Ford
Default

Well 460 and the word econo don't go together. :lol:
I think there may be some getting better milage.
Holly carbs are not an econo carb. You might get better milage out of a stock carb or an Edelbrock carb.. Maybe a little different timming setting and drive it with a light foot ... All tho they may not get very good milage they are consistance (same milage loaded or empty)
Tim
__________________
61 Comet W/200
http://i82.photobucket.com/albums/j2...al45/comet.jpg
64 International 4dr. truck w/466
http://i82.photobucket.com/albums/j2...al45/truck.jpg
Reply With Quote Quick reply to this message
  #3  
Old 02-11-2008, 10:53 AM
t120r t120r is offline
Senior Member
 
Join Date: Jul 2006
Location: Mississauga, Ontario
Posts: 636
t120r Driving a Ford
Send a message via ICQ to t120r Send a message via MSN to t120r
Default

If you want better gas mileage, go to www.mpgresearch.com. Lots of interesting ideas from small mods to indepth internal mods. All depends what you're willing to do.
Reply With Quote Quick reply to this message
  #4  
Old 02-11-2008, 11:05 AM
psquare75 psquare75 is offline
Senior Member
 
Join Date: Jan 2006
Location: Assonet, MA
Posts: 1,667
psquare75 Driving a Ford
Send a message via AIM to psquare75
Default

Edelbrocks are "easy" but aren't known for being thrifty..

If one would bolt on my Cougar I'd use a Qjet properly built by a reputable builder. Small primaries and massive secondaries.

Yes, they came stock on some Fords in the early 70s.
Reply With Quote Quick reply to this message
  #5  
Old 02-11-2008, 11:18 AM
RJP RJP is offline
Senior Member
 
Join Date: Jan 2006
Posts: 1,053
RJP Driving a Ford
Default

Several things you can do, providing the engine is stock and untouched. First, Advance the cam to zero or better if you can find a timing set that will allow 4 deg advance. Stock cams are severly retarded. Second, The Holley 4180 is jetted too lean jet up 2 or 3 steps. Stock 4180s should have something like 622 close limit jets, try a 65 in the primary. Check float level and power valve, try a 6.5 p/v. Third, recurve the distributor to allow more initial advance and centrifical to come in full at 2800-3000 rpm, taylor the vac. advance for your new curve and application. Do all the usual crap like tire inflation, rolling resistence, free flowing dual exhaust, etc. Do this and you should get close to 12 mpg or better. The above will only work for you if the engine is in good condition and has good compression, low leakdown.
Reply With Quote Quick reply to this message
  #6  
Old 02-11-2008, 11:43 AM
butch(4355) butch(4355) is offline
Junior Member
 
Join Date: Dec 2007
Posts: 45
butch(4355) Driving a Ford
Default

Check the floats on the 4180, when I picked up my '87 it too was getting about 6-7. Turns out the moron I had bought it from had timing set @ TDC and the floats were way way high, just pouring gas down the holes. After setting timing @ 8 BTDC (per emissions label) and setting the floats properly I jumped from 6.8mpg to 9-1/4, and I think there is still a considerable amount to gain...
Reply With Quote Quick reply to this message
  #7  
Old 02-11-2008, 03:07 PM
beltfeed's Avatar
beltfeed beltfeed is offline
Senior Member
 
Join Date: Jan 2006
Location: the sewer of New York state (Rochester)
Posts: 347
beltfeed Driving a Ford
Default

Put a two barrel on it such as a Holley 2300 series with a four to two adapter. Hey, at least you can stuff the little pedal to the floor and still be on two barrels only.
Reply With Quote Quick reply to this message
  #8  
Old 02-11-2008, 06:03 PM
ScottJackson ScottJackson is offline
Senior Member
 
Join Date: Feb 2006
Location: Iowa, near Missery (Missouri)
Posts: 2,286
ScottJackson Driving a Ford
Default

Edelbrock carbs with electric choke are set up slightly leaner from the factory than those with manual choke. Lean at cruise is a GOOD thing so long as it doesn't misfire because it's so lean. That's the best way to get good gas mileage. Also inflate the tires to their max recommended pressure, make sure the alignment is good, make sure brakes aren't dragging, make sure there's lots of ignition advance at low throttle, and put in the straight up timing chain.
__________________
If they can get you asking the wrong questions, they don't have to worry about answers.
Reply With Quote Quick reply to this message
  #9  
Old 02-11-2008, 06:46 PM
kim kim is offline
Senior Member
 
Join Date: Jan 2006
Posts: 1,266
kim Driving a Ford
Default

Quote:
Originally Posted by beltfeed
Put a two barrel on it such as a Holley 2300 series with a four to two adapter. Hey, at least you can stuff the little pedal to the floor and still be on two barrels only.
Absolutly backwards thinking.

If you need a carb that would allow a 460 to turn 4000 RPM, your looking at a minimum of a 500 cfm 2bbl. So your looking at a 2bbl carb with a venturi and throttle plates the same as a 1050 cfm 4bbl.

Now, if you need 500 cfm in a 4bbl, you can get buy with 2 primary throttle bores that are capable of only 250cfm, and use a progressive linkage, and have the second set open only when needed and or about half throttle. So most of the time your pulling high velocity air through a much smaller passage, with better atomization and distrobution.

A 4bbl with a driver that can keep a steady foot, is going to be about 3 times more efficent than a comparable 2bbl.
Reply With Quote Quick reply to this message
  #10  
Old 02-11-2008, 07:23 PM
boss521kid boss521kid is offline
Junior Member
 
Join Date: Jan 2008
Posts: 21
boss521kid Driving a Ford
Default

look into doing a 5 speed swap such as a zf trans. I have a 91 f350 dually and an efi 460 ext. cab and pull down a consistent 14mpg. never worse than 11 towing
__________________
the boss is back . I didn't know it ever left!
Reply With Quote Quick reply to this message
  #11  
Old 02-11-2008, 08:16 PM
Paul Kane's Avatar
Paul Kane Paul Kane is offline
Premium Member
 
Join Date: Jan 2006
Location: Bay Area, CA
Posts: 5,191
Paul Kane A Ford God!Paul Kane A Ford God!Paul Kane A Ford God!Paul Kane A Ford God!Paul Kane A Ford God!Paul Kane A Ford God!Paul Kane A Ford God!Paul Kane A Ford God!Paul Kane A Ford God!Paul Kane A Ford God!Paul Kane A Ford God!
Default

Bone stock old & tired 1985 F250/T19 4-speed/3.55 Dana 60 over here; managing 12 mpg hwy. I think more is possible with some engine mods. And even more with a 5-spd.

Paul
__________________
We're On The Web; Click Below:
High Flow Dynamics
Performance Components for the 429/460 Engine Family
Reply With Quote Quick reply to this message
  #12  
Old 02-11-2008, 09:08 PM
LivermoreDave LivermoreDave is offline
Senior Member
 
Join Date: Jan 2006
Location: KY
Posts: 518
LivermoreDave Driving a Ford
Default $

Just for discussion. I use a Holley 4160 450 CFM unit on my 468 cubic inch Ford 385. Very similar application to the topic. It runs OK, but ask yourself, how much time does your engine spend at engine speeds over 2500 RPM or less! If memory serves me correctly, the primary of a reasonable 4V carburetor (450 CFM to 600 CFM) is smaller than a 2V carburetor, lets say in the 350 CFM to 500 CFM range, hence improved gas mileage with the change to a 4V, all things equal! One thing that we should keep in mind, any F-Series, especially older models that are less aerodynamic, is like pushing a sheet of plywood through the air! IMO, trucks that are made to work, are not necessarily economical, relative to economics!

Dave.
__________________
Masters Degree in Perverted Idiocy.
Reply With Quote Quick reply to this message
  #13  
Old 02-11-2008, 09:09 PM
beltfeed's Avatar
beltfeed beltfeed is offline
Senior Member
 
Join Date: Jan 2006
Location: the sewer of New York state (Rochester)
Posts: 347
beltfeed Driving a Ford
Default

kim

Joined: 10 Jan 2006
Posts: 495
Posted: Mon Feb 11, 2008 7:46 pm Post subject:

beltfeed wrote:
Put a two barrel on it such as a Holley 2300 series with a four to two adapter. Hey, at least you can stuff the little pedal to the floor and still be on two barrels only.

Absolutly backwards thinking.

If you need a carb that would allow a 460 to turn 4000 RPM, your looking at a minimum of a 500 cfm 2bbl. So your looking at a 2bbl carb with a venturi and throttle plates the same as a 1050 cfm 4bbl.

Now, if you need 500 cfm in a 4bbl, you can get buy with 2 primary throttle bores that are capable of only 250cfm, and use a progressive linkage, and have the second set open only when needed and or about half throttle. So most of the time your pulling high velocity air through a much smaller passage, with better atomization and distrobution.

A 4bbl with a driver that can keep a steady foot, is going to be about 3 times more efficent than a comparable 2bbl.

Thanks for the math 101 class Kim.

Now I can explain a true and tested method for you. A few years back I put together a mild 355" Chevy motor for a full size four wheel Blazer. Crower beast hyd cam, headers, mild port work, etc. Turbo 350, 2400 stall conv, 3.73 gear 35" tire. Surely not a rocket set up for a 4000 pound plus truck. I ran a 780VS Holley, a 600VS Holley and a two barrel 350 Holley. Which one pulled the best, the 780. Which one got the best mileage the 350 two barrel by a long shot. The 350 could get 18 MPG average, the 600 got 14 and the 780 got 12 with the same driving style. Was the 350 2bbl a dog, not really and you could get 5 grand out of it . Being the truck would need more gear and or motor to stick you in the seat the small carb really didn't come in to play that bad. It could still lay down a nice 40' burnout with the two barrel. And pull a 5000 trailer at 75 with no problem. Now if you want to drive without ever opening the secondaries sure the 600 would get better mileage. But I prefer to get on the expressway at 60 not 40 by pushing the pedal down.
Reply With Quote Quick reply to this message
  #14  
Old 02-11-2008, 10:52 PM
Frank Merkl's Avatar
Frank Merkl Frank Merkl is offline
Senior Member
 
Join Date: Jan 2006
Location: Brooks Alberta Canada
Posts: 1,927
Frank Merkl Driving a Ford
Default

Darn my "79 Motorhome (23 1/2")with a 460 makes 14mpg (at 60mph)when I'm not pulling the trailer as long as the wind isn't blowing ! Pulling the race trailer loaded the whole unit weights 21500lbs and unless I running late it will still get 8-8 1/2 mpg , running late to get to the track I've got the mileage down to 3mpg ( I'm the Tech director there )I'm swapping the motor out with a 545 stroker (TMD cheap $789 kit)with a set of ported D3's -226-234 dur@.050 .525-.553 hyd cam-1.73 harland sharpes-stealth 8012 and a set of 1 3/4 ceramic coated headers, it would be in by now but one of my bud's just bought a new DTS engine dyno and I've sort of volenteered a motor to play on it ,and I'm going, why not see what this puppy will make for torque ! 2500-5000 rpm
Frank
Reply With Quote Quick reply to this message
  #15  
Old 02-12-2008, 05:30 AM
scumdog scumdog is offline
Member
 
Join Date: Oct 2007
Location: New Zealand
Posts: 239
scumdog Driving a Ford
Default

Have a look at my F100s specs below under this post.

I run a 780 vac.sec. Holley with #72 jets in the primary side, I hav HEAPS of advanced dialed into my Mallory (about 12 degrees on the timing light from memory) and no vacuum advance.

And I get 19, yes 19mpg at 60mph - ok we use Imperial gallons here but that should still equal about 16.5 to 17mpg for a US gallon. (and yeah, it's 'only' a 429 I guess!!)
__________________
A long way from anywhere

'70 429
Isky 270 cam
Roller-rockers etc
Torker & 780 Holley
Headers
Petronics and Mallory ignition.
Shift-kitted C6
2.75 4-spider 9"
All in '55 F100
Top speed: 131mph
Best e.t.: 13.93
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the 460 Ford Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:35 PM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.