1964 F100 with 514: ladder bars

[fox331]

Crew,

Need some advice on building a 1964 F100 into a "Gasser" lookalike. It has a straight front axle from the factory. We have a 514 with iron CJ heads that have been mildy ported and port matched to a Victor intake. We will run a solid lifter or mild street roller cam for 600 hp or so with a C6. Eventually, we will run a 150-200 hp shot of nitrous at the track. We hope to run with

The ultimate question is "hook". I have Cal-Tracs on a 1965 Mustang that hook pretty well, but I've read some threads that Cal-Tracs / leaf springs on a truck can be difficult to hook up consistently with BBF torque.

So, what is the board's experience with adding ladder bars to the early 60's trucks? The East Coast Gasser association does not seem to have any rules against them, and I think they would still be period correct for the late 60's early 70's. Chassisworks has a sweet kit with coilovers included for around $750, including all needed brackets.

[Cj Ford]

I run bears ladder bars with coil overs I am tubed with 31x16.50 et streets and I hook like no tomorrow.

1979 F150 all steel truck except for hood that was when I had my 466 with the alum cj heads it was running 11.31@118mph with a 1.63 60ft weight with driver 4190 lbs