Hi all.
Looking for best options/choices for cam manufacturers in the USA.
Trying to source a cam/spring recommendation for a blown 521.
Meth mechanical injected about 10pds of boost
12.5.1 static in a 4300 pd car.
Runs a t400 4000rpm stall and 3.5.1 ratio 9 inch.
Ford racing block with the trickflow 290 streets and littlefield 8/71
Thinking 7000 rpm will see it out of legs as im running scat internals.
This is not a drag car but that said it will not see the street.
Used as a burnout car in Australia so spends most of its time at 6500-7000 rpm for up to 2minute intervals. That said it still needs to be able to be driven to and from the competition areas so don't want it too undriveable.
Anyone got suggestions or who we could go to for such info.
Would like to keep it in the forum members if possible as they have been a great help with previous builds
Looking for best options/choices for cam manufacturers in the USA.
Trying to source a cam/spring recommendation for a blown 521.
Meth mechanical injected about 10pds of boost
12.5.1 static in a 4300 pd car.
Runs a t400 4000rpm stall and 3.5.1 ratio 9 inch.
Ford racing block with the trickflow 290 streets and littlefield 8/71
Thinking 7000 rpm will see it out of legs as im running scat internals.
This is not a drag car but that said it will not see the street.
Used as a burnout car in Australia so spends most of its time at 6500-7000 rpm for up to 2minute intervals. That said it still needs to be able to be driven to and from the competition areas so don't want it too undriveable.
Anyone got suggestions or who we could go to for such info.
Would like to keep it in the forum members if possible as they have been a great help with previous builds