460 Ford Forum banner

521 build with p-51

7K views 3 replies 4 participants last post by  Forcefed86 
#1 ·
what no. can i expect using the same top half Jon uses in his 460 build with a 521 stroker with about 12:1 compression
 
#3 ·
PHP:
<<<@!1!@>>>
From what i have read, i would say it would make the same maybe alittle more but not much then 700hp at 6400rpm and torque would increase to 670-690lb from 600lb. Then again i could be wrong.

I would get a custom cam to suit your build.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top