I'm using this one:
http://www.csgnetwork.com/compcalc.html
Does this all sound right:
Bore: 4.39 (.030" over)
Stroke: 3.85
HG Bore: 4.5" (looked up Felpro on Summit and this is what they have)
HG Thick: .041 (looked up Felpro on Summit and this is what they have)
Comb Chamber Vol: 75 cc (using D0VE's)
Piston Dome Vol: -22 cc (I have the dished pistons, does that cc look right?)
Deck Clear: .045" (I'm good with this)
8.96 is what I'm getting for Compr Ratio.
That good for a daily driver truck with some occasional pulling?
http://www.csgnetwork.com/compcalc.html
Does this all sound right:
Bore: 4.39 (.030" over)
Stroke: 3.85
HG Bore: 4.5" (looked up Felpro on Summit and this is what they have)
HG Thick: .041 (looked up Felpro on Summit and this is what they have)
Comb Chamber Vol: 75 cc (using D0VE's)
Piston Dome Vol: -22 cc (I have the dished pistons, does that cc look right?)
Deck Clear: .045" (I'm good with this)
8.96 is what I'm getting for Compr Ratio.
That good for a daily driver truck with some occasional pulling?