How much power are you running on your street/strip car? - 460 Ford Forum
460 Ford Forum  
Go Back   460 Ford Forum > Tech Topics > Engine Build Archive

Engine Build Archive A place to archive DYNO or 1/4mile VERIFIED engine builds. Please post any engine tech questions to the Engine Tech forum.

460Ford.com is the premier 460 Ford Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-07-2011, 01:48 AM
xoliex xoliex is offline
Senior Member
 
Join Date: Aug 2009
Posts: 649
xoliex First On Race Day
Default How much power are you running on your street/strip car?

I am wonder how much power some of you guys are running on your dual purpose car? i know a full street car is one thing and a full strip car is another but there are many who want a "slasher". now of course asking a 1000hp 460 stroker motor to have good street manners would be asking too much and of course asking a highly streetable street motor that gets a good 15 or so MPG 460 to run a 9 second mile would be ridiculous.

i ask the question because i have my plans set and my eyes on a 460 stroker build and want to hear input from others. i was thinking a 600-650HP 460 stroker build should be very streetable and lay down a good track ET. from reading past post, it looks like a few are running 700ish HP motor on the street.
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
  #2  
Old 12-07-2011, 12:23 PM
bigblok86ranger's Avatar
bigblok86ranger bigblok86ranger is offline
Super Moderator
 
Join Date: Mar 2009
Location: Beloit , Wisconsin
Posts: 5,164
bigblok86ranger Spreads the gospal of BBFbigblok86ranger Spreads the gospal of BBFbigblok86ranger Spreads the gospal of BBFbigblok86ranger Spreads the gospal of BBFbigblok86ranger Spreads the gospal of BBFbigblok86ranger Spreads the gospal of BBF
Send a message via Yahoo to bigblok86ranger
Default

I was making ~695 on 93 octane with my 523, street use was limited but it was drivable. I was just more concerned with going fast than street driving it so I didn't drive it much.

P.S. And I put the combo together with all out of the box parts so don't let anyone BS you it can be done.
__________________
Eric Millard
bigblok86gt@yahoo.com

528ci of N/A power

Circle R Racing Engines

Trick Chassis
Beloit,WI 53511
608-313-9197

http://www.trickchassis.com/

"LOL, WE DONT RACE DYNOS" Quoted for the truth!
Reply With Quote Quick reply to this message
  #3  
Old 12-07-2011, 12:46 PM
papadeath's Avatar
papadeath papadeath is offline
Member
 
Join Date: Sep 2011
Location: Los Angeles
Posts: 81
papadeath First On Race Day
Send a message via Skype™ to papadeath
Default

Quote:
Originally Posted by bigblok86ranger View Post
I was making ~695 on 93 octane with my 523, street use was limited but it was drivable. I was just more concerned with going fast than street driving it so I didn't drive it much.

P.S. And I put the combo together with all out of the box parts so don't let anyone BS you it can be done.
I'm wondering how much I will have? 460 with 429 cj heads. Valves are 2.25/1.75, mildly ported. Edlebrock RPM. Cloyes true roller timing gear set. New stock pistons, .20 over slight bore. Holley 750, Hooker pro comp headers. Comp thumper cam. What do you think? How much does a dyno cost? Haven't got the car back yet, they will be done next week I think.
Reply With Quote Quick reply to this message
  #4  
Old 12-07-2011, 01:48 PM
quick 52 quick 52 is offline
Senior Member
 
Join Date: Nov 2010
Location: leonard Mi.
Posts: 800
quick 52 First On Race Day
Default

i got 480hp and very streetable does have a lumpy cam but idles ok at 900rpm gets 13mph. put 2500 to 3000 miles thru the summer and 3-4 trips to the track best et on motor 11.45 @ 116 10.90s on spray
__________________
Drag week quickest street rod
2009 2010
Reply With Quote Quick reply to this message
  #5  
Old 12-07-2011, 02:44 PM
bigblok86ranger's Avatar
bigblok86ranger bigblok86ranger is offline
Super Moderator
 
Join Date: Mar 2009
Location: Beloit , Wisconsin
Posts: 5,164
bigblok86ranger Spreads the gospal of BBFbigblok86ranger Spreads the gospal of BBFbigblok86ranger Spreads the gospal of BBFbigblok86ranger Spreads the gospal of BBFbigblok86ranger Spreads the gospal of BBFbigblok86ranger Spreads the gospal of BBF
Send a message via Yahoo to bigblok86ranger
Default

Quote:
Originally Posted by papadeath View Post
I'm wondering how much I will have? 460 with 429 cj heads. Valves are 2.25/1.75, mildly ported. Edlebrock RPM. Cloyes true roller timing gear set. New stock pistons, .20 over slight bore. Holley 750, Hooker pro comp headers. Comp thumper cam. What do you think? How much does a dyno cost? Haven't got the car back yet, they will be done next week I think.
i would think ~375-400 depending on cam and degree of porting done. Dyno time runs ~$400-800/day from the places I have talked to.
__________________
Eric Millard
bigblok86gt@yahoo.com

528ci of N/A power

Circle R Racing Engines

Trick Chassis
Beloit,WI 53511
608-313-9197

http://www.trickchassis.com/

"LOL, WE DONT RACE DYNOS" Quoted for the truth!
Reply With Quote Quick reply to this message
  #6  
Old 12-07-2011, 08:19 PM
ITSA 91 ITSA 91 is offline
Senior Member
 
Join Date: Jan 2010
Posts: 261
ITSA 91 First On Race Day
Default

What's your car weigh and what's a GOOD ET?
Reply With Quote Quick reply to this message
  #7  
Old 12-08-2011, 12:00 AM
xoliex xoliex is offline
Senior Member
 
Join Date: Aug 2009
Posts: 649
xoliex First On Race Day
Default

Quote:
Originally Posted by quick 52 View Post
i got 480hp and very streetable does have a lumpy cam but idles ok at 900rpm gets 13mph. put 2500 to 3000 miles thru the summer and 3-4 trips to the track best et on motor 11.45 @ 116 10.90s on spray
You must have a pretty light car with this combo. my current set up idles at 650-700 with a manual transmission and i've only gone 12.69 at 108mph. driving it for 5 days straight to work and around town, i got 11mpg average until the tank went low.

i'm hoping to have my new motor built to run 11.0 ET or very close to it. 625hp'ish should get me really close. but yet again, i really enjoy driving on the street and i cruise alot at 50-60mph around my town so i do more steady driving than stop light to stop light. but do i want to have to rev to 3000rpms and slip the clutch just to get going, NO.
Reply With Quote Quick reply to this message
  #8  
Old 12-08-2011, 06:06 AM
ITSA 91 ITSA 91 is offline
Senior Member
 
Join Date: Jan 2010
Posts: 261
ITSA 91 First On Race Day
Default

I built my 91 Lincoln MKVII as a race car to drive on the street.Weighs 3900lbs with a 557 and a C6.Easy to drive and runs 10.0s.I don't even think about gas milage and I understand that it P.Os a few neighbors whenever I start it.Good luck with your project.
Reply With Quote Quick reply to this message
  #9  
Old 12-08-2011, 02:04 PM
quick 52 quick 52 is offline
Senior Member
 
Join Date: Nov 2010
Location: leonard Mi.
Posts: 800
quick 52 First On Race Day
Default

Quote:
Originally Posted by xoliex View Post
You must have a pretty light car with this combo. my current set up idles at 650-700 with a manual transmission and i've only gone 12.69 at 108mph. driving it for 5 days straight to work and around town, i got 11mpg average until the tank went low.

i'm hoping to have my new motor built to run 11.0 ET or very close to it. 625hp'ish should get me really close. but yet again, i really enjoy driving on the street and i cruise alot at 50-60mph around my town so i do more steady driving than stop light to stop light. but do i want to have to rev to 3000rpms and slip the clutch just to get going, NO.
my car is a 1952 f1 truck 3870# with driver does have overdrive trans. ive drove it on 2 drag weeks around 1200 miles each time plus the trip to the event 400 each way so 2000 miles in a week and average 11.67 et for the week hp rating is from wallace racing calulator online for mph in the 1/4
__________________
Drag week quickest street rod
2009 2010
Reply With Quote Quick reply to this message
  #10  
Old 12-08-2011, 03:52 PM
psquare75 psquare75 is offline
Senior Member
 
Join Date: Jan 2006
Location: Assonet, MA
Posts: 1,667
psquare75 Driving a Ford
Send a message via AIM to psquare75
Default

What is 'streetable'?

I was using my fairly mild 77 Cougar (when it had a higher compression 460 now in my F100) deliver product to three stores with an 60 mile trip combined city and highway and still make a little money from the mileage check. Had no problem hopping in it at the last minute for a 110 mile round trip to my girlfriend's family's place for a gathering during one of the several feasts that occur around here this past summer, and dealt with getting caught up in a parade and foot traffic.

Streetable to me is that, without panicking over temperature gauges or pedaling the idle.
Reply With Quote Quick reply to this message
  #11  
Old 12-08-2011, 04:18 PM
quick 52 quick 52 is offline
Senior Member
 
Join Date: Nov 2010
Location: leonard Mi.
Posts: 800
quick 52 First On Race Day
Default

Quote:
Originally Posted by psquare75 View Post
What is 'streetable'?

I was using my fairly mild 77 Cougar (when it had a higher compression 460 now in my F100) deliver product to three stores with an 60 mile trip combined city and highway and still make a little money from the mileage check. Had no problem hopping in it at the last minute for a 110 mile round trip to my girlfriend's family's place for a gathering during one of the several feasts that occur around here this past summer, and dealt with getting caught up in a parade and foot traffic.

Streetable to me is that, without panicking over temperature gauges or pedaling the idle.
i feel my truck is streetable but i dont use it as a daily driver its to nice and my toy plus 13mph on highway would brake me for gas
__________________
Drag week quickest street rod
2009 2010
Reply With Quote Quick reply to this message
  #12  
Old 12-10-2011, 12:53 AM
mach1 mach1 is offline
Member
 
Join Date: Dec 2007
Location: wichita ks
Posts: 82
mach1 Driving a Ford
Send a message via AIM to mach1 Send a message via MSN to mach1 Send a message via Yahoo to mach1
Default

3040hp
Reply With Quote Quick reply to this message
  #13  
Old 12-10-2011, 04:35 AM
xoliex xoliex is offline
Senior Member
 
Join Date: Aug 2009
Posts: 649
xoliex First On Race Day
Default

Quote:
Originally Posted by mach1 View Post
3040hp
haha, I'm on a military SSgt salary here my friend!
Reply With Quote Quick reply to this message
  #14  
Old 12-14-2011, 12:50 AM
orangejuiced91 orangejuiced91 is offline
Junior Member
 
Join Date: Feb 2008
Location: Evansville IN
Posts: 20
orangejuiced91 Driving a Ford
Default

Quote:
Originally Posted by ITSA 91 View Post
I built my 91 Lincoln MKVII as a race car to drive on the street.Weighs 3900lbs with a 557 and a C6.Easy to drive and runs 10.0s.I don't even think about gas milage and I understand that it P.Os a few neighbors whenever I start it.Good luck with your project.
Man, I would love to see some pics of this.
Reply With Quote Quick reply to this message
  #15  
Old 12-14-2011, 08:37 AM
xoliex xoliex is offline
Senior Member
 
Join Date: Aug 2009
Posts: 649
xoliex First On Race Day
Default

anybody else running some pretty serious motors on the street?
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the 460 Ford Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:01 AM.



Powered by vBulletin® Copyright ©2000 - 2014, vBulletin Solutions, Inc.

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.