IDT Eliminator A460 Head Flow Test - 460 Ford Forum
Engine Tech Archive A collection of all posts from the old Network54 forum

User Tag List

 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 4 (permalink) Old 01-30-2006, 03:57 PM Thread Starter
Forum Contributor
 
chilly's Avatar
 
Join Date: Jan 2006
Posts: 1,204
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
 
IDT Eliminator A460 Head Flow Test

Next Topic >> Return to Index

IDT A-460 Eliminator Heads: Flow Test
January 1 2006 at 5:45 PM
No score for this post Charlie Evans (Login c.evans)
from IP address 64.12.117.9

--------------------------------------------------------------------------------

Hey Guys,

In the middle of the three ring circus at the shop Friday, while we were dynoing another 598 CID Ford, I did a flow test for a customer from Tennessee that brought these heads in.

The heads were new and had been prepped by the folks at IDT. Their valve job and the chambers had all been hand worked and the bowls had "bowl blending". They were not ported, but had been port matched at the flange entry.

We flowed on a 4.625" bore @ 28" H2O. Intake valves were 2.425" in diameter and they averaged the following;

.100=79.5, .200=150, .300=231.3, .400=301, .500=358.6, .600=400.5, .700=433.5, .750=445.4, .800=457.3 cfm.

Hope you find this helpful,
Charlie

Score 1 2 3 4 5 (5=Excellent) Edit Message Delete Message Lock Thread Respond to this message

Author Reply
Jon Thee
(Login theemudracer)
152.163.101.9 was that a 45 degree seat or 52??
No score for this post January 1 2006, 5:49 PM

It would be interesting to know how many CC's the intake runner is.

very good info


Jon Thee

Score 1 2 3 4 5 (5=Excellent) Edit Message Delete Message Lock Thread Respond to this message

Charlie Evans
(Login c.evans)
64.12.117.9 Jon; 45* seat angle and 30* backcut around .075- .080" wide n/m
No score for this post January 1 2006, 5:52 PM

n/m

Score 1 2 3 4 5 (5=Excellent) Edit Message Delete Message Lock Thread Respond to this message

Jon Thee
(Login theemudracer)
152.163.101.9 nice numbers then!!!!!!n/m
No score for this post January 1 2006, 5:53 PM

n/m

Jon Thee

Score 1 2 3 4 5 (5=Excellent) Edit Message Delete Message Lock Thread Respond to this message


jeff hann
(Login cletus66)
205.188.117.68 Dang Charlie, Y'all have been busy.....Thanks for the info..........n/m
No score for this post January 1 2006, 10:35 PM

n./m

Score 1 2 3 4 5 (5=Excellent) Edit Message Delete Message Lock Thread Respond to this message

Charlie Evans
(Login c.evans)
64.12.117.9 Jon, They're 370 - 372 ccs
No score for this post January 2 2006, 11:11 PM

According to their literature if I remember correctly. The roof is raised .125" and their gasket is opened up to match. The intake port volume is a good bit larger than the TFS A-460 or EX 514 stuff. For comparison's sake, my CNC ported C-460, repeat C-460, intake volume is 381 - 383 ccs.

Hope this helps,
Charlie

Score 1 2 3 4 5 (5=Excellent) Edit Message Delete Message Lock Thread Respond to this message

Gary Blair
(Login GB3351)
12.191.228.53 What do you think about the volume of the IDT Charlie?
No score for this post January 3 2006, 3:07 AM

I don't quite understand a comparison to your C-460 volume.

Score 1 2 3 4 5 (5=Excellent) Edit Message Delete Message Lock Thread Respond to this message

Gary Blair
(Login GB3351)
12.191.228.53 Those are certainly good numbers. I have very little time
No score for this post January 2 2006, 12:24 AM

on the IDT head, however I would speculate that a full work up would yeild something like 470 CFM @ .800 with that size valve and 45* seats. With chamber work and 52* seats it is close to 490 CFM @ 1.00" lift. One other thing to note is the IDT head is .125 taller than the other "A" heads and I think this helps with a larger intake valve. You can run this chamber at 65 CC if needed. It's a real nice head.

Score 1 2 3 4 5 (5=Excellent) Edit Message Delete Message Lock Thread Respond to this message

Gary Blair
(Login GB3351)
12.191.228.53 Like Charlie said, those numbers are from a hand bowl blend.
No score for this post January 2 2006, 10:04 PM

IDT has several levels and options on porting including CNC finishing.

This message has been edited by GB3351 from IP address 12.191.228.53 on Jan 2, 2006 10:06 PM




Score 1 2 3 4 5 (5=Excellent) Edit Message Delete Message Lock Thread Respond to this message

B Howe
(Login BHoweDC)
216.221.96.201 Exhaust Flow #'s
No score for this post January 2 2006, 6:35 PM

Charlie,
Did you get a chance to do the exhaust also and how did they compare to the TFS A460 heads with comparable work into them?

1985 GT 466 TFS CJ heads. 6.48 @108.7 1/8 N/A, 9's @146 on the fogger.

Score 1 2 3 4 5 (5=Excellent) Edit Message Delete Message Lock Thread Respond to this message

Charlie Evans
(Login c.evans)
64.12.117.9 Yes; I Did,
No score for this post January 2 2006, 7:17 PM

just for ****s and giggles. There is a problem in regards to the exhaust and we'll be contacting IDT about it this week and give them a chance to resolve it, which I'm sure they will. The numbers I got are not valid, so there's no use posting them.

However, I feel like the exhaust on these IDT heads is just as good as any other equally worked A-460 head, such as those from TFS or EX 514.

Hope this helps,
Charlie

Score 1 2 3 4 5 (5=Excellent) Edit Message Delete Message Lock Thread Respond to this message

Current Topic - IDT A-460 Eliminator Heads: Flow Test

Next Topic >> Return to Index
chilly is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 09-03-2015, 10:21 PM
Junior Member
 
Join Date: Dec 2009
Posts: 27
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
idt heads

can any one tell me how to get a hold of jay or john that made idt head i have these heads and have some questions please
mikejvan is offline  
post #3 of 4 (permalink) Old 09-03-2015, 10:23 PM
Junior Member
 
Join Date: Dec 2009
Posts: 27
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by mikejvan View Post
can any one tell me how to get a hold of jay or john that made idt head i have these heads and have some questions please
please please please
mikejvan is offline  
 
post #4 of 4 (permalink) Old 09-11-2015, 06:01 AM
Senior Member
 
Join Date: May 2007
Posts: 3,730
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quote:
Originally Posted by mikejvan View Post
please please please
camp out at his front door..

Mot a smart butt suggesttion
2slow is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the 460 Ford Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
BORE SIZE WITH C460'S GREG H Engine Tech 2 03-08-2008 08:31 PM
CYLINDER HEAD INFO revised 11/3/07 DJOHAGIN Engine Build Archive 13 08-17-2007 09:34 AM
iron head tech talk bigbob Engine Tech 8 10-13-2006 11:55 PM
Mr. Kaase: Possible date of P51 Heads availability? chilly Engine Tech Archive 0 02-09-2006 07:32 PM
Yesterday's interesting flow test chilly Engine Tech Archive 0 01-30-2006 04:01 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome