RHP budget D0VEs complete. End of year special SOLD...
One pair of budget ported D0VE castings. Assembled and ready to go this week.
Equipped with one piece stainless exhaust valves and steel intakes 2.08" / 1.65"
Single w / damper performance springs with new retainers and 7 degree locks
Rocker studs and 5/16" guideplates.
Viton metal clad p/c seals
Castings have been completely rebuilt with K line bronze guide liners, three angle valve job, decked .015", thermally cleaned and blasted.
Castings are fully exhaust ported. Intakes are bowl blended with short turns rolled and intake port matched to the felpro 1230 intake gasket. Ports are left burr rough to keep costs down. They are however fully functional.
Flow rates are 320 / 180 max and are 300 / 180 cfm at .600" lift. These heads are a good way to pick up some compression on your D3 headed combo and are good for 50 hp over stock heads even in a mild build.
Cost is $995.00 outright plus shipping. exhaust valves are upgraded to stainless at no additional cost.
I will also include a remanned and recurved duraspark dizzy for $69.95 which is $70.00 off of the regular price or I will recurve an existing distributor as a courtesy.
As an added bonus the thermactor passages have been plugged with 7/16" rod.
Scotty J. "AKA" The "Mad Porter"
"EMC 2006" 3rd place finisher
Ported BBF iron head specialist
& Aluminum heads from all sources.
Custom ground cams
See our products in the Vendor for sale section
Customized crate engines
"Parkland Performance Auto Machine
" Formerly RHP