FS: 521 long block and extras - 460 Ford Forum
The Auction Block Buy, Sell, Trade your parts and pieces!!

User Tag List

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 32 (permalink) Old 04-02-2009, 02:36 PM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
FS: 521 long block and extras

All completely brand new never run

iron d9te-ab block 4.39 bore 2-bolt main

forged probe SRS pistons with moly rings 22 cc dish 4.39 bore

4340 forged crank and h-beam rods 4.3 stroke 6.8 rods arp rod bolts all professionally balanced

touched up trick flow streets 429/460 dual valve springs with damper, titanium locks, .270 raised exaust port, 2.2/1.760 in/ex valves forged pushrods, scorpion performance 1.73 rocker arms fastened down with ARP 12 pt. bolts

comp cams custom grind # ff 3357/3358r, gross lift- .577/.586 in/ex duration- 248/254 in/ex @ .050 lsa- 112 (cam spec sheet included) assembled with comp cams hydraulic lifter set

ALL completely assembled by Coast High Performance in Torrance Ca. aka Probe Racing Components all paperwork included

ALSO included:
trick flow fabricated valve covers with gaskets

ARP engine hardware kit chrome 12 pt. (pretty much all bolts needed to fasten timing cover motor mount bolts etc.)

milodon gold iriated rear sump oil pan 7 qt. with milodon oil pan stud kit and one piece gasket perfect for a fox chassis

CSR valve cover breather restraints with mr. gasket breathers

summit racing front timing chain cover and gaskets


Guys im in quite a pinch here as i just lost my daily driver thanks to those who cant drive and this engine will NOT be a good daily driver even though it would be really fun im asking 6000 for everything since i payed over 8400 for all of it (have paperwork to prove) and am willing to ship i am located in yorba linda, california please pm me if interested
Attached Images
File Type: jpg motor1.jpg (39.6 KB, 400 views)
File Type: jpg motor2.jpg (43.7 KB, 363 views)
File Type: jpg motor3.jpg (38.9 KB, 352 views)
File Type: jpg motor4.jpg (35.5 KB, 338 views)

Last edited by markmn123; 04-02-2009 at 08:29 PM.
markmn123 is offline  
Sponsored Links
Advertisement
 
post #2 of 32 (permalink) Old 04-02-2009, 08:30 PM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
bump
markmn123 is offline  
post #3 of 32 (permalink) Old 04-03-2009, 07:03 AM
Senior Member
 
Join Date: Jan 2009
Location: N.Va/Central FL/Deployed
Posts: 1,071
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
 
CC on the heads? Who did the heads and installed?

Compression ratio?

You don't say, but is it a flat tappet or roller hydraulic cam?

What did they rate the HP/TQ at with appropriate intake/carb?

Thanks!
windsor is offline  
 
post #4 of 32 (permalink) Old 04-04-2009, 01:36 PM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
c.r. is 11.7 to one
hydraulic roller
heads are 290 cc runners intake and 130 ex. with 74 cc com. chambers and theres no intake manifold so who knows what you can make i say you could pull 700 n/a out of it

and coast high performance installed the heads and did all work
markmn123 is offline  
post #5 of 32 (permalink) Old 04-06-2009, 01:25 AM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
bump
markmn123 is offline  
post #6 of 32 (permalink) Old 04-08-2009, 12:41 PM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
bump
markmn123 is offline  
post #7 of 32 (permalink) Old 05-02-2009, 12:33 PM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
bump
markmn123 is offline  
post #8 of 32 (permalink) Old 05-03-2009, 02:36 PM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
bump
markmn123 is offline  
post #9 of 32 (permalink) Old 05-05-2009, 12:45 PM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
bump
markmn123 is offline  
post #10 of 32 (permalink) Old 05-05-2009, 09:31 PM
Senior Member
 
pat427's Avatar
 
Join Date: Oct 2008
Location: tullahoma,tn
Posts: 454
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Cool heads

would you sell the heads seperate?if so how much?pat

race 2 win,never lift,67 f100 351 cleveland,69 f100 trickflowheaded 306,84 minitubbed notch 502bbf comming soon
pat427 is offline  
post #11 of 32 (permalink) Old 05-07-2009, 11:04 AM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
hm well id LIKE to sell everything at once cause it will be harder for me to sell the rest of the cam set and what not
markmn123 is offline  
post #12 of 32 (permalink) Old 05-07-2009, 12:51 PM
 
Join Date: Jan 2009
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
how much hp
onebadlx93 is offline  
post #13 of 32 (permalink) Old 05-07-2009, 10:42 PM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
it doesnt come with a intake manifold or carb but this motor is set up to handle a good 6-700 maybe more ive seen similar combos with 750+ reliable n/a hp with say a victor 460 mani and a dominater carb up top or you can even just go fuel injected (thats what i was gonna do) this is a superb price for everything listed
markmn123 is offline  
post #14 of 32 (permalink) Old 05-11-2009, 12:03 PM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
bump
markmn123 is offline  
post #15 of 32 (permalink) Old 05-12-2009, 06:00 PM Thread Starter
 
Join Date: Sep 2008
Posts: 85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
bump
markmn123 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the 460 Ford Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome