I have four Dooe heads with some port work, all have bronze guides cut for positive seals, all have 45 degree seats for 2.250 and 1.76 valves, of the four;
one is cracked,
one has been welded and has small leaks around valve seat, can be repaired, I ran it with K&W block seal
one is damaged in one cyl. due to dropped valve, can be repaired by a competent head service, dont know if I can find all the valves, locks, ret. for this one
one came off the other side and still has 2.250 and 1.76 Ferrea valves installed with 73121 Lunati springs and Lunati steel retainers set on 1.940 height.
I have a trade worked up at the machine shop that has my block, but if it falls through, these will be avalible for 650 plus ride, from 38801. I should know within a few weeks when I raise the cash.
Bad Company Till the day I die!
Last edited by bcr466; 04-05-2009 at 03:08 PM.