Want to trade stroker kit? 514 for 557?
I have a 514 stroker assembly, has about 20hrs of run time in a boat before it ate a bearing on the rod journal. The crank is fresh out of the shop with the wrapping still on it. The kit is probe srs +.080 pistons with rings, new eagle H-beam 6.8" rods, piston pins and clips, fresh straight crank 4.15" stroke, and clevite 77 P-series bearings.
The pistons are balanced, crank is internally balanced, and rods are balanced but the rotating assembly should be balanced together due to the switch in rods. I don't know the exact weight change between rod sets.
I am looking for a complete 557 stroker assembly for +.080 over if anyone is looking for a shorter stroker.
This not a desperate situation but I have other options for trade leverage if necessary.
I have a custom ground cam kit from scotty with lifters, platforms, keepers, and springs. the entire set is put together from scott himself. Lunati voodoo 61605 base with a 109.5 lobe sep. It is good for about 550hp and 600+ lb-ft of torque with my stealth intake and a good set of heads. huge torque down low as well.
I am also willing to sell if anyone wants to buy this. $1,400 plus shipping takes everything. I have more parts as well, feel free to message me.
Last edited by 77highboy460; 01-16-2011 at 02:22 PM.