466 10 Sec Pump Gas Street/Strip Engine
D1VE block .030 over, align bored, decked, oil drain holes chamfered
Eagle 6.605 H-Beam rods with ARP2000 bolts
Rotating assembly fully balanced and blue printed.
11.5:1 SRP flat top pistons with top and side coatings.
Ford Motorsports A429 Aluminum Cobra Jet Heads, ported, 2.25 int/1.76 exh.
Crower roller cam - 264/268 Duration @ .050, .664/668 lift
Crower roller lifters
Ford Motorsports 1.73 Roller Rockers with Jessel stud girdle
Ford Motorsports Single Plane High Rise Manifold - port matched to heads
MSD Billet Distributor
Milodon oil pan with Melling high volume oil pump
Engine meticulously put together. Over $1000 in the block alone!
Less than 400 driving miles and about 23 passes.
Ran 10.50s @ 131 in a 3200 lb car, bogging off the line with 850 vac 2nd and a tight converter!
Definitely a low 10 second engine with the right carb and converter.
Excellent pump gas street/strip engine! Still in car. Can see/hear it run.
Stepping up to a bigger engine for next season.
Intake to pan, $5,500
PM or call Rob (516) 799-1147
'68 Mustang Fastback. Coming soon - all aluminum 548 A441 Hemi! Gonna be one bad FoMoCo!
Last edited by onequickstang; 12-14-2011 at 10:54 PM.