WTT/WTS A460 race parts for street 460 parts
Located near everett, WA.
Email ookyresident a t hotmail.com (thats @, just fyi) or P.M.
So I bought a kit of used parts that had 200 passes on them (replaced at the end or the season as routine maintenance). I would love to trade some of the goodies I have for more street friendly parts. (will sell outright, too)
I would like some pistons for a production block that would net me at least 10.0-1 with D0VE's
solid roller cam with a more street friendly grind...
smaller valves? the 2.30/1.88's are a wee bit big.
I would also consider some small block goodies if you have them, i have an early bronco with a low miles 302 that I can use them on.
MY PARTS LIST:
So here is the parts list, there are a few things I know I can't use in a stock block.
JE 757F 4.5 inch bore pistons 13.2-1 with a 4.5 stroke and a 6.7 rod.
Several of the pistons have gouges/scratches on the skirts.
solid roller comp cam
gross lift .795 .782
tappit lift ....325 .....344
(specs for 115.0 centerline)
duration @ .50 ... 288.... 304
lobe lift............... .442 .460
lobe sep 115.
9.550 long, .080 thick pushrods
screw in studs, guideplates and stud girdles.
manly triple valve springs for the cam.
manly stanless 2.30 intake and 1.88 exh valves
copper head gaskets
I also have a set of triple .650+ lift 351w springs that are in the 200+ seated and 500+ at lift, I can't remember the exact numbers right now, haha.
Anyways, let me know what you have to swap.
Last edited by redtail; 05-31-2012 at 02:30 PM.