Join Date: Feb 2008
Location: Charlotte, North Carolina
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Also have a nice set of D3VE's, came off low hour OMC 7.5 Marine engine. Fresh from machine shop - cleaned, magnufluxed, pressure tested, guides cut for positive seals and clearance for high lift cams, 3 angle valve job, Viton valve seals, performance valve springs for mild hydraulic cams, decked .025 to raise compression - 91cc chambers. These are small valve heads so no problems with piston to valve clearance. Ported for mild street and competition - Intake ports gasket matches and equalized, valve bowls smoothed and guide narrowed - intake flow 320cfm @ .600 lift. Exhaust has a full reworked port - all lumps and bumps have been removed and the whole port reshaped for max flow - exhaust flow 190cfm @ .600 lift. This is a great all around head for a 460 and I have run several sets just like these and they are BADASS! 500 HP easy! Price is $700.00 plus fedex from Charlotte NC for 2 boxes at 70 pounds.