460 Ford Forum banner

New Crane Hyd. Roller cam, Lifters, Pushrods, Springs

2K views 4 replies 2 participants last post by  Brenden 
#1 ·
Crane Hydraulic roller cam, new never used, switching to a solid roller instead.
Cam specs are: 246Int/250Exh @.050 .636 lift on both 112 LC. $200

Crane Hydraulic roller lifters, #35532-16, New never used. over 400 new asking $350.

Comp Cams Hi-Tech Chromemoly pushrods, new never used.
#7932 8.5".... 8 for $75
#7928 8.95".... 8 for $75

Crane Valve Springs for above cam #99893-16, new never run. new $125 asking $100.00

Brenden Howe
701-240-5609
 
#3 ·
Hi Brenden,

My friend Ron had called you about the cam/lifters, and I then tried to email you last week (Via the board) concerning the cam/lifters. Evidently, it didn't go through for some reason....Are the cam and lifters still available?

Thanks! Mark
 
#4 ·
Mark, Yes the cam and lifters are still available. You can email me directly @ doctorhowe@min.midco.net or call me direct. Thanks

Brenden Howe
701-240-5609
 
#5 ·
All parts sold except Pushrods. Thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top