Depends on what they consider "unconventional" heads . Are A460 heads allowed?
1000hp
Iv'e been on this forum for a while and I mostly read. I had a pretty good idea of what I was going to build but I went to a mud race last night and saw a class dominated by rats and i cant take it. So now im starting my plans from scratch. I need close to a 1000hp+or-.
609ci limit
no tunnelrams, superchargers,injections or nitrous
single carb(alcohol carb allowed)
no unconventional heads or alluminum block
There are limitations on the truck itself but as far as the engine goes thats pretty much it. I dont think i left any restrictions off, now all i need is some suggestions to get me pointed in the right direction. Thanks
609ci limit
no tunnelrams, superchargers,injections or nitrous
single carb(alcohol carb allowed)
no unconventional heads or alluminum block
There are limitations on the truck itself but as far as the engine goes thats pretty much it. I dont think i left any restrictions off, now all i need is some suggestions to get me pointed in the right direction. Thanks
- Status
- Not open for further replies.
1 - 20 of 22 Posts
A460 are allowed pretty much hemis are just left out
the a heads are probably what i will build around but want to see other ideas
A big A460 deal will get more than 1,000 HP.
i'd run alchol, runs cooler and fuel is cheaper, big plus in my book for the mud. you guys running rails or full bodied trucks?
Full bodied trucks. Fiberglass front and bed sides allowed. Gutting allowed also
If you gotta run a carb.......Q16 gas at that power level with a carb.
X2 ... I realize you might be interrested in other heads but, actually the only question is which "A" head do you want to run.If you gotta run a carb.......Q16 gas at that power level with a carb.
There really is no other option if the Boss is not allowed...
so you would go with gas over alc carb? pros and cons?If you gotta run a carb.......Q16 gas at that power level with a carb.
I think you said...no injection?
1,000 + Hp engines want BIG carbs.........BIG alky carbs are TURDS!
1,000 + Hp engines want BIG carbs.........BIG alky carbs are TURDS!
iron head,or alum? how about a c head?
Depends on what they consider "unconventional" heads
can i ask where this bog was at. thanks
i dont wanna butt-in on this thread but i love learnin bout what makes power. what are a460 heads or c's ? are they some rare stock heads or aftermarket?
gotchaI think you said...no injection?
1,000 + Hp engines want BIG carbs.........BIG alky carbs are TURDS!
lowerplacemotorsports.com Lower Place motorsports. Martin Mills, Txcan i ask where this bog was at. thanks
ok just cheking cause my dad just pissed a whole bunch people off in troy. with his 615 w/a heads...man do them chebby boys know how to cry..LOLlowerplacemotorsports.com Lower Place motorsports. Martin Mills, Tx
well im not at all familiar with A heads but which are the best to get me there? and are boss better than a's?X2 ... I realize you might be interrested in other heads but, actually the only question is which "A" head do you want to run.
There really is no other option if the Boss is not allowed...
1 - 20 of 22 Posts
- Status
- Not open for further replies.
460 Ford Forum
A forum community dedicated to Ford big block owners and enthusiasts. Come join the discussion about performance, modifications, horsepower, tuning, build specifications, and more!
Full Forum Listing
Top Contributors this Month
View All
The Mad Porter
60 Replies
the_partman
45 Replies
PSIG
22 Replies
