460 Ford Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
74 Posts
Discussion Starter #1
I have 2 sets of rods that I am selling for a friend. The specs are below. The rods were ran in a 700" Hemi headed BBF. The motor was N/A and runs 6.80-7.00's. One set of rods has 28 runs and the other has 30 runs. If these sell then there will be another set of 30 run rods for sale once the motor is picked up from its winter refresh at Kasse.

The rods cost $1100 per set new from GRP. Asking $350obo plus shipping per set of rods

GRP 5500 Pro Series Rods
7.690" Length Center to Center
2.200" BBC Rod Size
.990" BBC Pin
732g total weight
490g on the big end
242g on the pin end
ARP L-19 Bolts
#29691 on one set of rods
#24643 on the second set of rods

Please feel free to contact me at [email protected] or 785-823-7988 for more info or pictures.





 

·
Registered
Joined
·
21 Posts
rods

not to be nosey but i have an inch taller block and 667 cu 4.610 bore my wrist pins are in my oil rings now and my rods are 7.320 how big a bore do you run?? thanks
 

·
Registered
Joined
·
74 Posts
Discussion Starter #5
Re: rods

wildfire said:
not to be nosey but i have an inch taller block and 667 cu 4.610 bore my wrist pins are in my oil rings now and my rods are 7.320 how big a bore do you run?? thanks
It my friends motor and he is heading to the PRI show at the moment. I'll try and reach him to get some details. I believe though that he is running a 11.7" block and somewhere right around a 4.6" bore. Those numbers are what I kind of remember his talking about. I'll try and find out the exact numbers when I next talk to him.

Thanks,
Chris
 
1 - 5 of 5 Posts
Top