460 Ford Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
962 Posts
Discussion Starter #1 (Edited)
Reduced - 2 Sets Of Roller Lifters

SOLD SOLD - 16 Used Comp Cams 836 Roller Lifters & 8 link bars, bought these off the board awhile back, nothing wrong with them, the guy I got them from said 20 passes on them. All the rollers turn OK, normal scuffing, no spreading. .874 body and .750 roller diameter. $150.00 plus shipping

SALE PENDING - 26 Used Crower 66217 (part number to the best of my determination) Roller Lifters and 6 New Link Bars and 12 used Link Bars. Purchased these off the board a while ago. Some of the used link bars were massaged on the edges, but there are at least 4 in good shape unmolested plus 6 New I purchased totaling 10 useable link bars. Notice on the picture that the previous owner had relieved the side oil hole back down to the body relief, my assumption being to get added oiling to the push rod, same goal as the Crower Hippo units I purchased and used. .874 Body and .725 Rollers. Besides the relief’s mentioned before, these all measure consistently and show no spread. $150 plus shipping


 
1 - 4 of 4 Posts
Top