460 Ford Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
A set of C8VE-E heads have been ported,they are complete dual springs,locks,retainers,valves.these heads have been machined to accept screw in studs and guidplates that are also included.The guides have been machined for teflon seals,and does have hardened seats in them,valve sizes are stock 2.08/1.65.A Crower cam part number 22356 mechanical lifter cam and lifters go with it.Lifters are numbered where they came out of and the cam specs are duration at .050 intake 247 exhaust 251 advertised lift is intake .536 exhaust .554 with lobe seperation of 108 do have cam card that goes too.The cam was matched to the heads would like to sell all together $600.00+ shipping 2 packages at 70 lbs. and 1 at 30 lbs. my location is Sayre,PA 18840.
 
1 - 1 of 1 Posts
Top