460 Ford Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
these heads are d3ve heads have been ported and polished to the water jackets and have not been on the block since the machineing.
these heads have 2.25 intake valves and 1.73 exhaust valves
they have .600' comp springs
was going to run these heads on my 466 but will run aluminum heads instead
the cam i had for these heads was .585 lift and 305 duration
these heads are ready to bolt on
need $550 for the heads
or a tade for a set of h beem rods and flat top pistons .30 over
 
1 - 4 of 4 Posts
Top