[89lxcoupe]

hey guys i have a 91 4cyl coupe that i put a 460 c6 combo in and the 4cyl throttle cable wont work right what all are you guy using, i have not had much luck with aftermarket cable setups.

 

[Dirtybird545]

I used a cable from an 85 gt.
Russ

 

[Mark Miller]

The one i'm using i'm pretty sure is from a mid 70's Lincoln with a 460.

Later Mark.

 

[SLOWnSTEADY]

I am using a "universal" throttle cable/bracket from Mr. Gasket. Cost me like $25 and it looks pretty damn nice! braided stainless steel.

 

[89lxcoupe]

I am using a "universal" throttle cable/bracket from Mr. Gasket. Cost me like $25 and it looks pretty damn nice! braided stainless steel.

you know i seen one of those at orielys but it didn't look like it was long enough !

 

[crittersf1]

Cable out of any 80's model V-8 or V-6 Ford car should work if it was carbed or throttle body injection.

 

[faststang902000]

i went to the junk yard and for a 4 banger 1 and cut the end off. then used a kit to make it work on a carb. it has a little allen bolt to lock the piece to the cable.

http://www.jegs.com/i/Lokar/625/S-1034/10002/-1

 

[SLOWnSTEADY]

you know i seen one of those at orielys but it didn't look like it was long enough !

worked just fine for me. I have one on my SBF swapped mazda RX7 as well.

 

[89lxcoupe]

worked just fine for me. I have one on my SBF swapped mazda RX7 as well.

i bought one today, going to see if its long enough. thanks !

 

[SLOWnSTEADY]

i bought one today, going to see if its long enough. thanks !

Let us know! I got mine at O'reillys, I think they sell different length cables, I thought mine looked really short too but I actually ended up having to cut a couple inches off of it.