460 Ford Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
9,767 Posts
RE: cam advise...

:?:


Need more information...

Willing to use stall convertor?

Stock connecting rods?

You max desired engine rpm?








8)
 

·
Premium Member
Joined
·
9,767 Posts
Cam specs...

Jeff Pettit said:
Sorry,

2500 stall
truck rods with arp bolts
like to go no more than 6000
I would do a comp custom EX series cam. 226/234 @ .05. .554"/.574" lift on a 110 Lobe sep. A step up to the XE274H would be allright too. Both cams would keep the hp peak in the 5 to 6k range. The first about 5,200 and the second about 5,600.

They will work well with your stall speed, gearing and weight. "0'' decking the pistons will keep C/R at right around 10 to 1 which is fine.


8)
.
.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top