460 Ford Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1 (Edited)
502 BBF with stock ford block bored .030 over.
4.150 eagle 4340 crank
6.8 eagle h beam rods
srp pistons 12.5+ to 1
main girdle
ported super cobrajet iron heads with stainless valves and hardened seats
Bigs 1000cfm quikfuel stage 5 4150 carb
Victor Jr. dominator intake with 4150 adaptor
comp full roller setup
[email protected] 106 centerline .650 lift
Clevite h bearings
Total seal rings
Sfi balancer
msd distributor and 8.5mm ford motorsports plug wires.

Call Ken 715-417-0001 or 715-294-4032
located in barron, wi

10 qt oil pan
Freshened and dyno'd on 8/3/12
made 740hp and 660 lb ft of torque on 110 octane
$7500
 
1 - 1 of 1 Posts
Top