460 Ford Forum banner

1 - 20 of 38 Posts

·
Registered
Joined
·
989 Posts
Discussion Starter #1
1971 Block
504 cubic inch
.040 bore
4.400 Diamond racing dished pistons
9:8:1 compression
total seal rings
BME aluminum rods
4.145 stroke Stock crank (off-set grinded) Crank was checked out and seemed to be a early year crank
ARP bolts throughout
Moroso Foxbody Oil Pan (7qt)
Melling HV oil pump
comp cams solid roller lifters
JW Flywheel

Comp cams Solid roller

650 intake
657 exhaust

236 intake
242 exhaust

110 lobe sep

1969 Cast Iron heads
2.25/1.75 SS valves
Bronze guides
Hardened seats
Port Work has been done to them
Heads were worked on pretty well. THey flow 345cfm @.700 lift. I have the paper work on them from which my head porter did all the work.
Heads were cut for larger springs. All comp cams stuff on the heads
.700 lift comp cams springs
Jomar Stud Girdle
Crower 1.73 SS roller rockers
Cant remember exatly what size push-rod but they were thick ones (Lem Evans ordered them for me)

Victor 460 Intake
Port Matched to heads
Intake is Chrome Power coated (really nice intake)
All good gaskets (cork screw material ones)

900 cfm Demon Carb.

CSR (blue) electric water pump
Power coated Aluminum Motor plate
ATI Harmonic balancer (internal balanced)
CSR -16 Polished Water neck
MSD (small cap) Billet Distributor
Taylor 409 wires (red)
Ford Motorsports Valve Covers

2 1/8" primary tubes
3.5 inch collector
3.5 mandrel bent throughout
Flow master 50 series mufflers
3.5 inch rear dumps
Exhaust system is powder coated Chrome front to back


Moral of the story with this motor is; My plans are to go back to a small block and need the funds in order to do so. This motor was built last winter. Has Approx 50 runs on it with 30 street miles. Is an awesome built motor. I only used Rotella 15/40 oil in the motor. Changed oil every 2 races and adjusted valves more than anybody else would have. This motor made 480 hp/480tq to the rear wheels with 32 degrees of timing in my foxbody mustang. Later I found out the car had picked up over half a second by going to 36 degrees of timing at the track, so I'm pretty sure this motor is making right at 625-650hp to the flywheel. If anybody is seriously interested in this motor I will make somebody a super deal along with my custom made headers and full exhaust. I put alot time and money in this particular build. The exhaust system was built for a foxbody mustang. I have well over $10000 in the motor and exhaust system. I can send pictures via email as well. Just send me a message on here or email me at [email protected] and I will get you some pictures. This motor won me my PINKS ALL OUT LAST YEAR at charlotte ZMAX track. It wasn't no throw together motor. Anybody who buys this motor is buying one hell of a motor. Motor made all it's power at 5600rpm. The motor will live a long time at that rpm. I want $8000/obo for everything. No shipping unless the buyer is willing to pay for the shipping.

Shawn
757-630-3408

No calls after 10pm please.
 

·
Registered
Joined
·
989 Posts
Discussion Starter #4
Anybody interested in this motor? Great Motor for a great price. Will take $5000 bottom dollar for the motor. TTT
 

·
Registered
Joined
·
3,730 Posts
Do you gotta be a dick in every forum? Let the man try to sell his motor for what he wants. It's not your place to say what a deal is or isn't. :rolleyes:
nope , not being one . are you ? Shouldnt say "cant beat the deal" . example 71 block $75 /$100 , bore Free , head work ,again free and and and . don't say whats your time worth . how much you make being on the forum or watching tv . thats where my time would come from . he let himself in for a responce and he got one .
 

·
Registered
Joined
·
2,387 Posts
Not everyone has the tools or the experience to build motors. Plus not everyone falls into deals of "free head work". The price you are willing to pay may not be what someone else is willing to pay. Obviously you are not interested in his motor, so why not do like everyone else and not post rude comments and move to the next ad?


1Bad65,

sorry to clutter your thread with crap, just bothers me when people pop in and try to cause issues.
 

·
Registered
Joined
·
1,454 Posts
Its $5000 now thats cheeeeeeeeeeaaap!!..........its a shame im a little to far to pick it up lol. Good luck with the sale 1bad65:)
 

·
Registered
Joined
·
989 Posts
Discussion Starter #14
No worries. 2Slow man you always busting my balls. $5000 is super cheap for this motor.
 

·
Registered
Joined
·
279 Posts
nope , not being one . are you ? Shouldnt say "cant beat the deal" . example 71 block $75 /$100 , bore Free , head work ,again free and and and . don't say whats your time worth . how much you make being on the forum or watching tv . thats where my time would come from . he let himself in for a responce and he got one .
YA HE IS A DICK ON EVERY FORUM HE'S ON! HE'S ALWAYS GOTTA SAY SOMETIHING! If I wasn't building my A block 557 I would buy it up for another project. Hope your sale works out I will put the word out local here for ya. Have a good day 1Bad65.

Dan
 

·
Registered
Joined
·
989 Posts
Discussion Starter #17
Thanks Dan. Appreciate it. Yeah very surprised a motor thats proven that won $13,000 on national television is still sitting in my garage not sold. Motor is been proven. Just sitting and I bought another sbf to grudge race with. Only reason it's for sale.
 

·
Registered
Joined
·
280 Posts
Times are tuff, and the economy is in the tank, people are not spending like they used to because of it. Good deal and good luck with the sale. Wish I had the money, would work out real nice in my Torino!!! ;)
 

·
Registered
Joined
·
387 Posts
well if youre with the same chic as I seen on that zmax episode, drape her over that motor in a thong and sell that thing on ebay...it'll go quick. ...and thats a compliment.
 

·
Registered
Joined
·
203 Posts
YA HE IS A DICK ON EVERY FORUM HE'S ON! HE'S ALWAYS GOTTA SAY SOMETIHING! If I wasn't building my A block 557 I would buy it up for another project. Hope your sale works out I will put the word out local here for ya. Have a good day 1Bad65.

Dan
Boss351 ur a tool! go see if u can get any "donations" for your build....unbelievable!!!

1bad65, at 8000.00 not such a good deal....at 5000.00 a bit better for what your getting, tough economy right now....alot of good deals everywhere....good luck with the sale!

2slow, stop being a "unit"......LOL
 
1 - 20 of 38 Posts
Top