460 Ford Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter #1
HEY GUYS, i have a 514 bbf, blue thunder heads and victor 460 intake ported and matched by engine systems,heads flow around 360 int.,venolia flat top pistons,comp ratio is approx 11.5:1,crane gold rockers,eagle rods , arp fasteners,stock block and crank,motor made 824 hp with roller cam, i changed to a solid lift cam, not sure the diff in hp but some less,i just bought a new crower roller thurs. with new springs for heads and new lifters.paid $1191 for them. shortblock has just been freshened.we are going to a truck and want a bigger c.i. engine for torque purposes.this motor was built by purvis performance .i was going to part out but decided to sell as complete only. maybe sell roller cam, lifters ,and springs seperate because i havent used them yet. 760 lift approx ,can find out exactly if int. motor went 6.0 in eigth in mustang and could be driven on street if need be.very close to pump gas limit.$7000 for motor with solid cam or $8000 with roller. thanks
 
1 - 2 of 2 Posts
Top