460 Ford Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1 (Edited)
My new build is what I have so far, I plan to add a custom Straub camshaft and lifters. This is going to be in a 19' jet boat, pump gas, max RPM will be 6K ish. Still deciding on Rockers and an oil pan, the oil pan is slightly tricky due to clearance issues.

-Block bored .030 over decked to 10.300
-Forged 4.300 crank
-Forged 6.700 H beam rods
-Racetec custom -22 cc dish Forged Pistons
-AFR 280 heads
-AFR intake for 4150
 
1 - 1 of 1 Posts
Top