460 Ford Forum banner

1 - 20 of 28 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter #1 (Edited)
521 BBF Stroker - Freshened And Ready To Run


BLOCK

429 SCJ 4-Bolt Main Block (6015-A)
Seasoned, De-burred and Tanked
SCAT 4.300 Stroke Crank
Speed Pro Power Forged 10.8 :1 Pistons
Speed Pro Rings
Manley Aluminum 6.8 Rods
Clevite 77 Rod Bearings
ARP Rod Bolts
Oil Restrictor Kit
Reworked and Chamfered Oil Passages
Screened and Polished Lifter Valley
Crane 713 Lift/302 Duration-Roller Cam
Crane Roller Lifters
Cloyes Double Chain
Melling High Volume Oil Pump
Canton Windage Tray Oil Pan
Fluiddampr Harmonic Balancer

HEADS

Ford Motorsport A-460 Aluminum Heads – Machined and Prepped by Howe Racing Heads.
Manley Stainless Steel 2.350 Intake Valves
Manley Stainless Steel 1.880 Exhaust Valves
Crane Valve Springs
ARP Head Bolts
Crane Chrome Moly Push Rods
1.73 Aluminum Roller Rockers
Manley Guide Plates, Studs and Locks

INTAKE MANIFOLD:

Ford Motorsport A-460 Dominator Manifold – Prepped By Howe Racing Heads.


The engine was built by Alvin Whaley and Chris Howe. Alvin Whaley was an IHRA Pro Stock car builder and owner. Chris Howe, (from Howe Racing) is a well respected cylinder head machinist, porter and assembler. He is now Jon Kaase's main head man. I'm getting out of racing, that's why I have the engine for sale. For more detail information about this engine, please EMAIL ME.

Will guarantee this engine is sound, is built extremely well, and will run hard.

$8,000.00. Shipping cost varies upon location.

If seriously interested and would like more detail information and photos, please E-MAIL ME at [email protected]

The engine is located in: Spring Hill, FL. 34610 (Near Tampa)
EMAILl: [email protected]
 

Attachments

·
Registered
Joined
·
70 Posts
Discussion Starter #3
Hey Monte, thanks for the reply.

I would prefer to sell the engine complete. But if someone only wants the short block, I'll let you know.

Thank You,
Jim.
 

·
Premium Member
Joined
·
39 Posts
motor

I raced with Alvin and Floyd at The Brainard optimist drag strip was that the motor in the old mustang II he had man that had to be in early 90s maybe motor ran good in the mustang .
 

·
Registered
Joined
·
70 Posts
Discussion Starter #7
Yes it was in the Mustang II, but in the early 90's he was running a 514 in it. This engine was the second engine Alvin had in the car.
 

·
Registered
Joined
·
258 Posts
What did this engine run?
 
1 - 20 of 28 Posts
Top