460 Ford Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
532 10.1 comp. 4.440 probe piston, box stock P51, 6.8 H beam, .080 roller cam bearings ,home built tunnel ram, 2 quick fuel 1050 doms, comp mech roller, .695 .296 @.050 kaase spec. kaase oil pump . All pulls done with sunoco 93. will post dyon sheet when pick up engine. It made 750 at 6100 and 710 tork at 4100 , I'm happy with the results . for my first intake , think I might be a little light on the cam but wanted to put some street miles on it. thanks to all you guys on this site, learned alot , give me your input. Now lets see if my little 64 falcon can stay together.
 

Attachments

·
Registered
Joined
·
127 Posts
532

Really nice work and very good results =well done! It would be interesting to know the performance change if you had dyno'd your engine with the single carb.

You could be right about the cam, but great results on the intake work.
 
1 - 9 of 9 Posts
Top