460 Ford Forum banner

545 pistons

4K views 5 replies 2 participants last post by  The Pope 
#1 ·
I have a brand new set of Mahle 545 pistons. I removed one from the box for a picture and that is it. They come with rings, pins and clips. These pistons have a dual valve pattern for standard valve location and they have a relief for Kaase/AFR heads. Check the Mahle application chart to verify. The part number is BBF350390I38. They have a -38cc dish and a 1.35 compression height. They list for around $800, I will sell these for $550 plus shipping. I prefer a text or call (before 9:00 p.m. EST). Three Zero Four-Six Eight Nine-6285. Thanks.
 
#6 ·
I posted a pictures of these in the tech forum under piston to valve clearance topic.
Here's the link to the thread with the pictures.....

GLWS
I'd be interested, but I'm nowhere near the point of selecting a piston for the 545 I hope to build.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top