460 Ford Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
113 Posts
Discussion Starter #1
564 shortblock, IDT Eliminator Premier block- bushed .904 lifter bores, Scat 4.15 billet crank, BME 6.865 rods, Diamond 4.650 pistons- lightened with vertical gas ports and fit Profiler/C460 heads- dome might have to be modified for C heads, H-13 .165 pins, .043/.043/3mm rings, Bullet solid roller 286/308 at .050- 114 LS with Crower .904 Z bar lifters, had a Danny Bee on front but keeping that, block was repaired in 06 and has one sleeve and was welded by the oil pan rail- nicely done and no issues, pistons and rods have dyno time only, rest of parts have 1 1/2 seasons and dyno time. $4900, can assemble or leave apart, located in CT, 203-503-4269

Looking for some parts and will consider trades for PG with aftermarket case or looking for bare aftermarket block like A460 or Eliminator
 
1 - 3 of 3 Posts
Top