460 Ford Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
5,483 Posts
Discussion Starter #1 (Edited)

572 cubic inch shortblock....$3495.00



-D9TE block (sonic checked, .100+ minimum non-thrust wall thickness at 4.500 bore)
-Eagle crankshaft, 4.500 stroke, nodular iron (+$500 for 4340 forged)
-Scat 4340 I-beam rods 6.700 length (+$150.00 for 4340 Eagle H-beams w/ARP 2000 bolts)
-Icon forged pistons, 4.500 bore (choice of OEM, SCJ/P-51, or A460 reliefs, Flat top, -22cc dish, or -39cc dish)
-Total Seal plasma moly file fit rings
-Durabond cam bearings (+$425.00 for roller cam bearings)
-Rotating assy dynamically balanced
-All critical clearances checked and set per application
-Custom options available per request


 

·
Registered
Joined
·
5,483 Posts
Discussion Starter #3
what would you think the rotating assembly be rated at horsepower wise and RPM wise if ya dont mind and hows shipping thanks
With the nodular iron crank and Scat I-beams...6500 rpm and 700 HP.
With the 4340 crank and Scat I-beams....7000 rpm and 800 HP.
With the 4340 crank and Eagle H-beams...7500 rpm and 1500 HP.

Shipping a shortblock is usually $250-$350 in the lower 48 states.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top