8.75 pushrods on IN. & EX. ??????

1235 Views 2 Replies 2 Participants Last post by redsuperduty, Jul 9, 2010

redsuperduty

Discussion Starter · Jul 9, 2010

Measured my pushrod length and came up with 8.75 on intake & exhaust. Seems kind of wierd they came out the same, is that a common length with my combo?
545 with Edelbrock victor jr. heads, comp solid roller cam 308 / 316 dur. .727 lift., ford racing roller rockers.

Save

1 - 3 of 3 Posts

Lem Evans

· #2 · Jul 9, 2010

Same lenghts happens most of the time.....8.750" is longer than most.

Save

redsuperduty

Discussion Starter · #3 · Jul 9, 2010

I'll double check it, I thought it was long too from what I've read on here, but that length puts me on center of the valve stem at the bottom of the lobe. Maybe these victor jr heads are the reason I have a wierd length??

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Home
Forums
Tech Topics
Engine Tech

Top Contributors this Month