460 Ford Forum banner

1 - 20 of 22 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1 (Edited)
95 mustang drag car/ i run in a foot brake class 6.90 1/8 mile, [email protected] in 1/4 mile
motor is a 514 d1ve block bored .030 over, about 10 passes on motor
eagle crank 4.14 stroke
rods eagle h beam rods 6.80
srp pistons 11.7:1 flat top
cam:roller comp cams 34-703-9 lift in..726 exh. .692 dur @ .050 in. .276 exh. .280
lunati roller lifers
heads: ported dove stainless steel vales intake 2.20 exhaust 1.76, k-motion 1000 valve
spings,crane rollar rockers,crane 3/8 push rods, crane guide plates.
trans: c6 with 3000 tci stall
rear end; 8.8 with 4.11 gear moser full spoll 31 spline axles, c- clip elimnators,ta gridle
car has a 8 point roll cage,sub frame connectors,qal k member,lakewood 90/10 sturts
50/50 rear shocks,weld wheels 15x4 front 15x10 rear with 28x10.50 m/t slicks
b&m shifter, painless wiring switch panel
stock suspion car
car has no title
price $9500.
call frank 478-827-0131
fort valley GA. south of Atlanta
 

Attachments

·
Registered
Joined
·
18 Posts
Discussion Starter #7
i would like to sale all together.
the cam might be a little to big for the street has kind
of a smooth idle but kind of ruff at1500 to 2000
 
1 - 20 of 22 Posts
Top