460 Ford Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
93 Posts
Discussion Starter #1
I have a new A 460 block for sale. The only machine work thats been done is the cam journals. Made to accept roller cam bearings. Have a set of used TFS A 460 heads. 2.35 and 1.88 vavles. Never hurt or ported. Heads have around 35 runs on them. $2100.00 for heads, $2200.00 for block or $4000.00 for both. You pay ride from Kansas. Thanks Scott
 

·
Registered
Joined
·
1,637 Posts
I have a new A 460 block for sale. The only machine work thats been done is the cam journals. Made to accept roller cam bearings. Have a set of used TFS A 460 heads. 2.35 and 1.88 vavles. Never hurt or ported. Heads have around 35 runs on them. $2100.00 for heads, $2200.00 for block or $4000.00 for both. You pay ride from Kansas. Thanks Scott
Heads have around 35 runs on them. $2100.00 for heads,

I think not! after picking these up they have a lot more than 35 passes on them and have the stripped out thread holes to prove it.5 in all. Not to mention that I found an earlier post stating he locked up and converter and bent some Valves. His comment to the that was I bent 1 valve
Next time I'll think twice from buying anything from Scott.
I sent him a PM asking for any restitution for this and he has not replied

Ace
 

·
Premium Member
Joined
·
5,231 Posts
Sorry to hear that Ace! I hate to hear of anyone getting screwed. I looked at the guys threads and of 93 threads only 2 were not him selling something, I try to only buy from the guys who contribute more to the forum.
 
1 - 7 of 7 Posts
Top